Question about 2007 Chevrolet Equinox LS

Open Question

Equinox wiper arm stripped

One front wiper does not move

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: driver side windshield wiper doesn't work

only proper fix is to replace. might could put some epoxy in the wiper arm(very small amount) and reinstall let it set up without using for a while. remember if you do this it will never come off again!!!

Posted on Nov 06, 2008

Ad
  • 1 Answer

SOURCE: 2005 Chevy Equinox Wiper blade hits edge of window

they are different size wiper blades. I just replaced mine in my 2005 chevy equinox. Passenger side is shorter.

Posted on Feb 23, 2009

  • 290 Answers

SOURCE: Wiper arm not moving

Check the splines on the post where the wiper are mounts and make sure they are not rounded off. If they are intatct, remove the cowl (sheetmetal between the hood and windshield) and check the mechanical linkages that connect the wiper arms together

Posted on Mar 25, 2009

emissionwiz
  • 76848 Answers

SOURCE: How do I seperate the rear wiper arm from the

GO TO THE LINK FOR INSTRUCTIONS

http://www.streakfreewiperblades.com/site/990209/page/813439

Posted on Oct 14, 2009

gripfitter
  • 557 Answers

SOURCE: The arm on my rear wiper does not move.

remove the arm to see if the motor turns. Look inside where the arm mounts, is the inside worn out?

Posted on Dec 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2009 Chevy equinox and my wipers donot want to move but you can hear the motor moving inside what is the problem


Sounds like maybe a stripped gear or broken linkage. You may be able to remove the plastic covering the linkage at the base of the windshield to inspect for issues. This may also require removing the wiper arms.
If I had to guess, I'd say bad gearbox. Linkage should be pretty tough.

Mar 30, 2017 | Cars & Trucks

1 Answer

Wipers not working


Either the linkage has come loose(most are held in place with plastic caps) or the wiper motor arm has stripped. If you can see the linkage is moving, then the wiper arms are stripped.

Dec 05, 2015 | Cars & Trucks

1 Answer

Whats the torque on the wiper arm nut a 2010 Equinox this is the second time it came loose


as tight as you can get it, with out stripping it. i usually torque them to like 40 Ft/lbs

Mar 10, 2011 | 2009 Chevrolet Equinox

1 Answer

Wipers will not move, makes noise and there is power to the motor. Motor was replaced. Someone told me that the arms probably moved to far and are now stuck, how do I fix this?


Windshield Wiper Blade & Arm Removal & Installation Front To Remove:
  1. Mark the location of the wiper on the windshield.
  2. Remove or disconnect the following:
    • Nut cover
    • Nut from the wiper arm
    • Wiper arm
Wiper arm mounting nut gm_truck_s10_w-wpr-arm_ret-nt.gif
To Install:
  1. Install or connect the following:
    • Secure the wiper arm with the nut.
      1. Tighten to: 17 ft-lb (23 Nm)
    • Nut cover
Rear To Remove:
  1. Put the wiper arm in the park position.
  2. Remove or disconnect the following:
    • The washer hose from the connector
    • The cap from the wiper arm
    • The nut from the wiper arm
    • The wiper arm from the wiper motor shaft
Rear wiper arm mounting nut gm_truck_s10_w-wpr-arm_ret-nt_rr.gif
To Install:
  1. Install or connect the following:
    • The wiper arm on the wiper motor shaft in the park position with the wiper arm resting on the park ramp
    • The nut on the wiper arm
      1. Tighten the nut. Torque to: 17 ft lbs (23 nm)
    • The cap on the wiper arm
    • The washer hose on the connector

---
The wiper motor hopefully is ok, but if the wiper arms were not mounted at the right spot, it could have damaged the motor as it returned to the rest position, unfortunately.

If there is noise, the noise could be coming from the wiper arm joint being stripped out or the motor itself assuming that the ball joints under the hood and behind the firewall are still connected.

Check these items, and I'm sure you will get to the bottom of this.

Good luck on this repair.

Oct 08, 2010 | 1997 Chevrolet Blazer

1 Answer

Driver side wiper dont work


vehicle may have a stripped wiper arm.( remove wiper arm,turn on wipers & see if splined knob is moving ),if so turn off wipers & replace wiper arm.or if knob does not move then have to remove cowel & check linkage to wiper transmission!

Sep 13, 2010 | 1992 Dodge Caravan

2 Answers

The passenger side wiper blade arm moves manually but not when wiper control is engaged only the drivers side wiper works can anyone help with this


is the stud stripped or u might need to pull the cover off at the bottom of the wiper and tighten the nut.

Mar 28, 2010 | 2006 Chevrolet Equinox

1 Answer

Driver side windshield wiper, does not work, after a long cold night, it first moved slow, then stop moving altoghter. I can move it by self, will not move with the other wiper.


The wiper arm stripped out. pop the cover off the base of the wiper then take the nut off. You should use a small 2 jaw puller or even a well placed prybar to force it off. Take a look at the base and the arm to see if one or both of these stripped the splines out.

Jan 11, 2010 | 2001 Chevrolet Blazer

1 Answer

The arm on my rear wiper does not move.


remove the arm to see if the motor turns. Look inside where the arm mounts, is the inside worn out?

Dec 22, 2009 | 2007 Chevrolet Equinox LS New Cars

1 Answer

One wiper arm not moving.


remove the end cover and nut. arm comes off

Feb 24, 2009 | 1999 Lincoln Navigator

1 Answer

Rear Windscreen wiper not working Seat Ibiza 2003


smonahan, The rear wiper fuse is actually a circuit breaker. It will reset itself.
Your wiper arm has probably stripped were it attaches to the motor shaft. You can check by trying to move the wiper arm with your hand, if it moves back and forth, its stripped. A new wiper arm will be needed.
Try it and let me know.
Regards,

Feb 12, 2009 | 2002 Oldsmobile Bravada

Not finding what you are looking for?
2007 Chevrolet Equinox LS Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...