Question about Peugeot Cars & Trucks

Open Question

Peugeot 207 GTI relay problem - indicator not working

Peugeot 207 GTI indicator not working - relay problem. Where is the relay located?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 127 Answers

SOURCE: Break pads on a 207

hallo
remove two bolts from behind
Marko

Posted on Sep 30, 2009

Ad
  • 279 Answers

SOURCE: i have a 2001 206 gti and the engine just died

hiya mate if you have got a live at the fuel pump when engine is turning over then your relay is working.
you could possably have a fauly crank position sensor (which can be checked using a code reader) which would stop the engine from starting, also check the fuel pressure switch has not been activated (this is located on the n/s/f inner wing and is a small black unit with a red cap on it)
it would also be a good idea to make sure the timing belt has not snapped.

Posted on Dec 16, 2009

  • 20 Answers

SOURCE: airbag warning light stays on what does this

THE LIGHT IS INDICATING THAT THE AIR BAG SYSTEM HAS A MALFUNCTION AND WILL NOT DEPLOY IF NEEDED YOU MUST HAVE IT SCANNED FOR THE ERROR CODE AND REPAIR ODDS ARE THAT IT HAS AN OPEN SIR COIL IN THE STEERING COLUMN

Posted on Mar 04, 2010

emissionwiz
  • 76682 Answers

SOURCE: My Peugeot 207 is completely unresponsive - everything from the eloectronics to the engine. Key won't work and have tried the spare. Any help would be appreciated

Test the cars battery it may be defective

Posted on Jun 01, 2012

azcoyoterobb
  • 36 Answers

SOURCE: ESP / ARS fault with Peugeot 207

Nobody can give that...at best, a Guesstimate...but they will need to do some testing, Diagnosis...they charge by the hour, are good at what they do, and if they are real good, will be ASE Certified Mechanics...ask around, for good references...I don't know where you live, but in North Portland, (Oregon), there is a small shop on Interstate Ave., that works on them...good luck...

Posted on Jul 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CHANGE INSIDE REAR VIEW MIRROR PLEASE


If it is mounted on the windshield, the mirror is attached to a bracket that is glued top the glass. You will see a small set screw at the base of the bracket. Most likely an Allen screw. Loosen the screw and slide the mirror up off the bracket.

Feb 25, 2016 | 2008 Peugeot 207 GTi

1 Answer

Ac compressor relay location


If you suspect low refrigerant you can use paperclip to jumper the low pressure switch momentarily. Relay should be in main fuse block under the hood, I think.

Jun 12, 2015 | 2006 Peugeot 207 1.6

1 Answer

How to find powe steerig reservor peugeot 27


There isn't one, its electric power steering on that model . If the steering has got heavy check the appropriate fuse to make sure that hasn't blown, they should be listed in your handbook. If it has, replace it but keep an eye on it as fuses don't normally blow for nothing. If it hasn't blown then the motor has probably burnt out but that normally blows the fuse.

Jul 08, 2014 | 2008 Peugeot 207 GTi

1 Answer

Central locking faults


Probably just needs new batteries in the button itself.

Apr 16, 2014 | 2008 Peugeot 207 GTi

1 Answer

Faults with peugeot 207


Change the pollen filter?

Apr 04, 2014 | 2008 Peugeot 207 GTi

1 Answer

How set tappets


Are you sure these are not hydraulic?

Mar 28, 2014 | 2008 Peugeot 207 GTi

2 Answers

When i unlock my vehicle the side mirrors does not open, can anyone please tell me what to do.


get inside the car turn the ignition on look at the electronic controls that operate the mirrors where you select left and right mirrors and just pull it backwards, It had me stumped for a while a quick look at the owners manual made it all clear (207 GTI) hope it helps

May 17, 2012 | 2006 Peugeot 207 1.6

1 Answer

Where is the anti pollution filter situated on a peugeot 207


There is no such thing.

If youre refering to Antipolution warning coming up on display:

Sadly a common fault with 207s is random fault warnings coming up on the display.

If it's a real fault, then you should notice a fall off of performance and this indicates a trip to your garage to get it fixed.

If the fault comes and goes, or there is no loss of performance, do what most 207 drivers do and ignore it !

Mar 16, 2012 | 2007 Peugeot 207 CC

2 Answers

Break pads on a 207


hallo
remove two bolts from behind
Marko

Sep 30, 2009 | Peugeot Cars & Trucks

1 Answer

I have a 2001 206 gti and the engine just died


hiya mate if you have got a live at the fuel pump when engine is turning over then your relay is working.
you could possably have a fauly crank position sensor (which can be checked using a code reader) which would stop the engine from starting, also check the fuel pressure switch has not been activated (this is located on the n/s/f inner wing and is a small black unit with a red cap on it)
it would also be a good idea to make sure the timing belt has not snapped.

Sep 29, 2009 | Peugeot Liberte Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...