Question about 1999 Pontiac Sunfire

2 Answers

Where is the oil filter on this car and if you can . be specific

Posted by on

  • Rick Byrd
    Rick Byrd May 11, 2010

    be specific , no problem , what year , make , model and engine size ?

    i suspect you have a 2.2 eco tech motor .

    i have pics and how to , standing by .

    J5


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Oil fillter is on the bottom of the front side of the motor to the left standing looking to the front of car on the right side under the car

Posted on May 03, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 13 Answers

2.4 FRONT CENTER OF ENGINE AT BOTTOM
2.2 ENG PASSENGER SIDE LOWER CORNER OF ENGINE IN REAR BEHIND BELT TENSIONER

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a fuel filter on a polo vivo 2010


Engine oil: Drain or extract and replenish; renew oil filter Engine oil: Drain or extract engine oil ? Chapter. Renewing oil filter ? Chapter. Replenishing engine oil ? Chapter. Draining or extracting engine oil Special tools and workshop equipment required t Used oil collection and extraction unit -V.A.G 1782- t Oil spill cloth -VAS 6204/1- Draining or extracting engine oil Carry out the following procedure: > Note
t For engines with standing oil filter the oil filter must be renewed before changing the engine oil. When removing the filter element a valve is opened, the oil in the filter housing automatically flows into crankcase. t If the engine oil is drained and not extracted with an oil extractor, replace drain plug. This prevents leaks. t Observe disposal regulations! - Extract engine oil using used oil collection and extraction unit -V.A.G 1782-. or - Remove oil drain plug. - Let engine oil drain. > Note
t The oil drain plug is fitted with a secure seal, therefore the oil drain plug must always be renewed. t Observe disposal regulations! - Screw in new oil drain plug with seal hand-tight. - Replenish engine oil, specification ? Chapter. Engine oil capacity: "Power unit" ? Power unit; Rep. Gr.17"Lubrication; oil capacities" or ? Maintenance table. Specified torques for oil drain plug: t Petrol and diesel engines 30 Nm > WARNING
t Torque specifications must not be exceeded. t Excess torque can cause leaks in the area of the oil drain plug or even damage. Renewing oil filter Renewing oil filter, 1.4 l and 1.6 l injection engines > Note
t Prevent engine oil from dripping onto components in engine compartment. t Oil new O-rings before installing. t Observe disposal regulations! Renewing oil filter, 1.4 land 1.6 l engine Carry out the following procedure: alt="W00-10211"> - Unscrew cover cap -1- with socket insert 36 mm AF and remove cover with oil filter insert -4- and valve -5-. - Renew O-ring -2- of cover cap and O-ring -3- of valve. - Renew used oil filter element with new filter element. > Note
Observe disposal regulations! - Tighten cover cap -1-. Cover cap torque setting: 25 Nm. Replenishing engine oil Oil specifications ? Chapter Engine oil capacities: "Power unit" ? Power unit; Rep. Gr.17"Lubrication; oil capacities" or ? Maintenance table. General notes > Note
Observe disposal regulations! - After replenishing with oil, wait at least 3 minutes and then check oil level. - Pull out dipstick, wipe with a clean cloth and push dipstick in again to limit stop. - Pull dipstick out again and read oil level. alt="N01-10183"> For dipstick as illustrated: A - Oil must not be replenished. B - Oil may be replenished. It may happen that the oil level afterwards is in the -A- region. C - Oil must be replenished. It is sufficient if the oil level is in the -B- region (hatched area) afterwards. There is a danger of damaging the catalytic converter if the oil level is above the -A- marking. - If oil level is below -C- marking, top-up oil to -A- marking. alt="N01-10255">
25567142-tnzdbwhiaswbtdy3r1p2vgzs-2-2.png

Mar 14, 2015 | Volkswagen Polo Cars & Trucks

1 Answer

Oil filter


You'll need an oil filter wrench, collection pan, and socket set for starters. A lift and jack stands are advisable for safety reasons. Any auto store in your area can look up your vehicles specific oil filter and specific oil weight needed. Some even tell you your cars oil capacity. Once you've got the materials and the car is raised start by loosening the oil pan bolt but not removing it. Once you can spin it wit your finger line up the oil pan and remove the bolt with your fingers keeping in mind there is usually a washer you'll need to remove also(if it ends up in the pan of oil a magnet will easily retrieve it. Once drained remove the old filter and replace with new one. Replace the washer and bolt. Under the good you'll find your oil reservoirs cap. Remove it and either using a funnel or simply cutting an empty bottle in half using the cap end without cap to act as a funnel(I've even used an oil quart container I just bought storing the contents in a large cup, bowl, or other disposable container. Once you think you've got enough oil in the car run it for 5 minutes to circulate the new oil. Turn engine off and check the oil level using the dipstick. Adding more oil is easier than removing but if your level is too high you risk blowing seals so do not ignore this. Dispose of oil properly, most auto shops take used oil for free.

Aug 27, 2014 | Cars & Trucks

1 Answer

Where is the oil filter


Not only does this YouTube video show the location of the oil filter on a 2001 Chevrolet Blazer, but it also claims that an entire oil change can easily be done by an average individual with a few common tools.

The oil filter is place underneath a flap on an easily-serviceable part of the car.

Watch the video for more specifics:
Doin an oil change on 2001 chevy blazer part 1

Jun 06, 2014 | 2001 Chevrolet Blazer

1 Answer

2000 Chevy Cavalier Coupe 2.2 L V4 2200 SFI oil filter size?


its a inturnal filter an you need a 32 socket to remove the cap to remove the oil filter only hand tight n replace the rubber gasket every time you change the filter

Aug 09, 2013 | Cars & Trucks

1 Answer

Where's the oil pressure sending unit located specifically on a 2001 honda prelude


OIL PRESSURE SENDING UNIT LOCATED EITHER DIRECTLY ABOVE OIL FILTER OR LOCATED TO SIDE OF OIL FILTER.

Aug 15, 2011 | Honda Prelude Cars & Trucks

1 Answer

How much oil do u use for an oil change in my quest v6


4 1/4 qts if oil filter is not replaced. 4 1/3 if filter is replaced. A new filter absorbs some oil too. Read your owner's manual for accuracy please. It might be under "Maintenance" section or "Specification" section.

Jul 16, 2010 | 2004 Nissan Quest

2 Answers

What size oil filters do i use for cars


You use whatever oil filter is specified for that specific vehicle.
Thanks,
Lee

Sep 14, 2009 | 1991 Chevrolet K1500

1 Answer

Oil specification


API 'SJ' 5w30 and it holds 5 qts with oil filter. Great van! Good luck with it. Curt

Apr 21, 2009 | 2000 Toyota Sienna

1 Answer

GRADE OF OIL AND OIL FILTER NEEDED FOR A 1997 SUZUKI ESTEEM?


Use a 5w30 oil and the filter the parts person and/or book says to use for that car.

Don't use Fram oil filters. use the cheapest filter that is not fram and any name brand oil that is 5w30.

Autozone has a deal right now for 5qts of oil and a filter for $13

Mar 31, 2009 | 1997 Suzuki Esteem

1 Answer

Trying to replace the oil filter housing on a 1994 VW golf


Go to your public library and check out a service manuel for your specific car in the manuel will be the procedure for changing oil and other important info specific to your car including changing your oil filter

Mar 18, 2009 | 1994 Volkswagen Golf

Not finding what you are looking for?
1999 Pontiac Sunfire Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...