Question about 1998 Chevrolet Blazer

1 Answer

My 1998 Chevy Blazer is stuck in 4hi. It WILL switch to 4Lo, but it will not switch back to 2wd. Any ideas of what might be wrong and how to fix it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,101 Answers

There is a electrical actuator on the transfere case that controls when you put in 4 wheel hi or 4 wheel lo and 2 wheel

Posted on Dec 30, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fknstart
  • 404 Answers

SOURCE: 96 Chevy Blazer Stuck in 4hi

try reverse and push the button

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chevy suburban stuck in 4 lo anyone out that cant help


Put truck in Neutral while key in run position engine off or on (doesn't matter which). If it's pushbutton 4wd then try hitting 4low again. if that doesn't work some of the chevy trucks required you to press 4hi to get into 4high and then press 4hi again to get back to 2hi, unless yours has a 2hi button. In that case press 4hi to get into 4high and then press 2hi to get back to 2wd. either way you need to be in neutral to get out of 4lo. I have shift on the fly (Mechanical Shifter on floorboard for transfer case) on my 1990 Suburban and still have to put it in neutral to get out of 4lo. Good Luck.

Jan 30, 2014 | 2000 Chevrolet Blazer

2 Answers

I have a 02 Chevy Z71 1500. I locked it in 4lo and now my (service 4wd) light is on and the lights on my panel for my auto, 2wd, 4hi and 4lo don't work. Plus it will not come out of 4lo. Any answer's?


Okay the motor for the 4x4 got stuck in 4LOW, Can you accsess the 4x4 motor switch,at see if that will retract the motor and default to 2 wheel drive because the switch itself went bad and wont disengage. see if that will help if not youll just have to by pass the switch and trigger to its normal position make sure its in neutral also

Apr 23, 2011 | 1999 Chevrolet K1500

1 Answer

96 chevy 4x4. no ind lights. stuck in 4hi


Replace the selector switch assembly. Common failures.

Mar 27, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

!998 ford ranger stuck in 4x4


sounds like it's the motor is going bad or has a bad connection, try cleaning the connector if there isn't any gunk in the connector, check the manual see if there is a ohmn test you can run on the motor, if not i'd replace the motor.

Mar 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

Service 4wd light


what causes the 4wd to kick in when you have it in 2wd

Mar 13, 2009 | 2004 GMC Yukon

1 Answer

96 Chevy Blazer Stuck in 4hi


try reverse and push the button

Jan 06, 2009 | 1997 Chevrolet Blazer

1 Answer

Will not shift into 4HI


These have a problem with grounds, i run a ground from my frame to transfer case

Dec 28, 2008 | 2000 Chevrolet Blazer

1 Answer

My 98 chevy blazer won't shift into 4wd.


Most common problem is the vacuum diaphragm that is so inconviently mounted UNDER the battery tray.The cable that locks in the front diff is attached to it and vacuum pulls it in/out.

Dec 22, 2008 | 2000 Chevrolet Blazer

2 Answers

4wd stuck in 4Lo


it is either the control switch or the actuator. look if light is flashing on push button switch. if so it is stuck. you can check actuator on front axle, to watch and see if it is moving.

Dec 06, 2008 | 2001 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...