Question about 2004 Hyundai Santa Fe

1 Answer

Trouble code: p0431 on 2004 hyundai santa fe 3.5L. Wondering about possible solutions

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

P0431 is described as "warm up catalyst efficiency below threshold (bank 2)" This code is in the exhaust system air injection section of the trouble codes. Possible it relates to an oxygen sensor reading.

Posted on Jan 13, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 77169 Answers

SOURCE: PROGRAM KEYFOB FOR HYUNDAI SANTA FE

This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.

Posted on May 22, 2009

  • 84 Answers

SOURCE: Change serpentine belt 2004 Hyundai Santa Fe

it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,

Posted on Oct 05, 2009

  • 15 Answers

SOURCE: My 02 Hyundai santa fe

I'm not sure if this has anything to do with your problem.. but in 2002 there was a recall on the 01 & 02 santa fe's w/ the 2.7L engine for improperly manufactured crankshaft position sensors and internal gaps within the cases allowing epoxy to contact the printed circuil board, which resulted in cracking of the printed circuit board capacitor. A damaged capacitor could result in engine stalling.  Recall campaign number 03V030000 

Posted on Oct 19, 2008

  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

  • 134 Answers

SOURCE: Hyundai Santa Fe 2005 won't shift into first gear

Most likely the o-ring seal between the torque converter and the transmission is going bad. Get that transmission rebuilt pronto before serious damage is done! But first, have a mechanic drop the transmission pan and look for signs of a very thin silvery film coating the inside of the pan. If found, then the transmission definitely will have to be rebuilt, and the torque converter will also have to be replaced since embedded metallic particles in the old torque converter will eventually come loose, due to wear of the clutch plates within the torque converter, and eat up the rebuilt transmission. Now, here is the deal once the transmission has been rebuilt:

Change the transmission fluid and filter once a year -- no matter what! If you do this, then you should never have any more problems with the transmission.

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 hyundai santa fe


This code refers to a misfire on cyl#5. Possible spark plug or ignition coil ( most common ). Could also be an injector or wiring to any of the above

Jul 12, 2015 | 2004 Hyundai Santa Fe

1 Answer

What are the possible solutions for trouble code P0017 hyundai santa fe?


Have you googled the code to see what it means? Try that for a clue.

Jan 07, 2015 | Hyundai Cars & Trucks

1 Answer

What are the possible solutions for Hyundai Santa Fe trouble code P0017


P0017 Hyundai - Camshaft Deviation Too Low

If there was recent work on the engine take it back to who did repairs. Also check you oil if dirty or low.

Jan 07, 2015 | Hyundai Cars & Trucks

1 Answer

Trouble code p1516 fromhyundai santa fe 2007


Go to Google & type: 2007 Hyundai OBD P1516

Mar 15, 2014 | 2004 Hyundai Santa Fe

1 Answer

Abs light stays on on my 2004 Hyundai Santa fe


The light is telling you there is a problem with the system and as long as the light is on the system is disabled.
You need to have someone scan the body computer for trouble codes.

Aug 22, 2012 | 2002 Hyundai Santa Fe

1 Answer

Error code p0446 hyundai santa fe 2004


this is an obd2 trouble code table, it can help you understand the meaning of code.
for the p0446
Causes:
Faulty vent valve
Open, short or excessive resistance on Vent valve control circuit
Blockage of vent valve
Bad PCM
Possible Solutions:
Replace Vent valve
Repair open, short, or resistance problem in control circuit
Repair open, or short, or resistance problem in power circuit
Replace PCM

Jul 14, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

I have a Hyundai Santa Fe 2001, 6 cylinders. The


Hi
It sounds like the transmission slipped. You need have the vehicle check for trouble codes and the trans. fluid level.

Steve

Jan 29, 2010 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

1,059 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8725 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...