Question about 1994 Geo Prizm

1 Answer

I have a 94 geo prizm and its making a clicking noise. started out slow and has gotten worse. When you press or release the clutch during shifting.

Has not always clicked during turns but does now. also, a slight rumbling feeling.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 20,706 Answers

I anwered every geo post back to here, and i stop. at jan 1

your issues is a hands no deal, no net bunny can diagnose noise.
if you google finding car noises, you can read for a week.
vast numbers of tests, and inspections, etc.
noise is the most hard of all.
now a bad clutch
if you depress the clutch, just to take out the slack. running
and it makes noise this is the end of life sound for
your throw out bearing, or there is junk (road kill) in the linkage
undercar, all mech know what do, first look then fell the throwout.
ive even removed the linkage, and flexed the bell arm and can
fell the bearing beating my hand harshly, this is the acid test.

Posted on Oct 10, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: 94 Geo Prizm CV or driveaxle?

on this type of vehichle, you have two axles in the front; one going to each side. Chances are that the boot at the axle joint was torn and that is why you are having problem. In teh past people used to replace the boot, this day and age its actually cheaper to replace the axle. So you would need to replace that side of the axle (the half shaft).

Posted on Nov 20, 2008

Shereena_M
  • 601 Answers

SOURCE: When i turn the iginition switch the on my 97 geo

This sound is coming from self-starter, get it checked.

Thanks
Kinldy rate the answer
Smith

Posted on Jul 08, 2009

alicantecoli
  • 22114 Answers

SOURCE: My 1995 GEO Tracker runs fine but im not sure if

get a mechanic to have a look ,because it could be either ,either a broken transmission shaft or the clutch has burnt out .has a woman been driving this manual?? wearing high heels ??

Posted on Dec 01, 2009

  • 1146 Answers

SOURCE: 1996 Geo Prizm power steering noise

Hi:
If you have been loosing fluid for some time, and running the car with low fluid in the power steering pump, then the pump is most likely worn and causing your noise. Do you know where your leak is? You might need just a power steering hose, but no matter what, your power steering pump is the most likely cause of your noise!

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1991 Prizm. When I release clutch in first, why doesn't it go?


1991 Prizm (aka, Corolla) dead clutch (aka SLIPS)
does engine crank and start in gear? in gear?
the first thing to check is the clutch pedal actuation system.
cable on some , and Hydraulic on othere
open hood, see that MC for clutch, is the Reservoir dry?
yes, no?
yes, then the slave or mc is bad or both, the one leaking is bad.
Most cases Hydra clutches can not cause slip. (rare)
its a cable, can if cable frays inside or rust, (big time common)
well all cable clutches need service, if not it fails.
called setting free play in the book, FSM book
I love the above post where he guesses then sets a price.
first is diagnosis prices last and varies all over planet earth
and is useless here. prices. always.
Ill look in Michell's for you.
it's not a cable system,
Mitchells shows, hydra. clutch
so unbolt the slave.(on bell)
start car in gear, does car move. yes /no?
yes, clutch ok , and slave is siezed.
no, then clutch is bad (inside bell housing) $$$$$

i posted both ways, as these era cars run to clutch systems.
that could even change mid year, production.

S= slave
Bell = bell housing
L = clutch lever.
see the 2 bolts?
some Slaves can seize (due to running old fluid full of water)
Dot3 fluid is hydrascopic and needs service every 2 years. min.
26082435-4gmiw4kjhjrck3uewcae1lzo-4-0.jpg we check the MC and all parts related here.
to see if the L lever is stuck to the right above.
never condemn any clutch until these checks are done
or go broke fast. IMO

Feb 05, 2016 | Geo Cars & Trucks

1 Answer

Procedures on replacing clutch pressure plate and release bearing on 96 Geo Prizm 1.6 liter


Here are a couple of very detailed videos:
Rock Auto is your best source for parts. 1996 GEO PRIZM Clutch Kit

Jan 31, 2015 | 1996 Geo Prizm

1 Answer

Door sensor stays on even when doors closed and key is off in 94 geo prizm


because the switch is stuck or wires shorted to it.

Jan 19, 2013 | 1994 Geo Prizm

1 Answer

My 1995 Geo Prizm. I hear noise at the left side of the transmission where the drive axle enter the transmission not the usual clicking sound when the drive axle goes bad. The noise show up when I...


I would still suspect the drive axle because it could very well be the inner joint of the axle clicking and not making the accustomed noises related to a drive shaft noise.Thanks Megabuck

Aug 29, 2011 | 1995 Geo Prizm

1 Answer

When I was driving my 1996 Geo Prizm at around 25mph, I heard a popping sound and then the grinding started like it was rubbing metal to metal. When I turn to the right, it sounds louder. I had the brakes...


CV Joint went out. since it gets worse when you turn right it is most likely an inside drivers side CV joint or the out side passenger side. The popping sounds was probably the dust boot popping from pressure build up which should make it simple to locate since you just need to identify the boot with a tear in it.

Feb 28, 2011 | 1996 Geo Prizm

1 Answer

How do you open the trunk of a 94 geo prizm if you lock your keys in the trunk?


On the 94 geo prizm the back seats fold down, They are a split back seat so there is a button on either side on top of the upper seat.

Nov 11, 2010 | 1994 Geo Prizm

1 Answer

Stick shift


Time for a new clutch.

Jun 13, 2009 | 1993 Geo Prizm

Not finding what you are looking for?
1994 Geo Prizm Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...