Question about 2005 Nissan Altima 2.5

Open Question

How many thermostats does a 2005 nissan altima have, and where are they

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 2005 Nissan Altima

HEY WHATS UP BRO this is what you have to do i just got brand new headlight replacements for my 05 nissan altima and it looks great by the way if you replace one you should just do both becasue it will look weird. anyways i have an hid kit as well but so. what you have to do is remove the bumper take all the plastic screw things off the top and on the botton underneith the bumber then you remove 2 screws on each side of the bumper they are located kinda in the dender well then you unscrew those then you can pretty much pull the bumper off there are 4 screws holding on each headlight 2 on top one on the side and one on the bottom front in order to remove the headlight you have to take off the bumper. hope this helps oh ya and buy buy the way you should get an hid kit the bulbe size for the altima is an h1 bulb and you need to get the single beam buld. get it at xenoneyes.com and the the 6000k. The 6000k look the best and is the brightest trust me you wont be let down they are brighter and last longer than the standard halogen bulb um also and like 5 times brighter. they are 129$ at xenoneyes.com thats the cheapest price that i have seen and they are a great value and good quality just dont touch the bulb. oh ya if you replace one headlight do both it looks much better. maybe try this web site to show you a little bit of how to do it
http://images.google.com/imgres?imgurl=http://thaibruin.netfirms.com/ALTIMA/HID5.jpg&imgrefurl=http://www.nissanclub.com/forums/f-q-2002-2005/65970-how-installing-h-i-d.html&h=600&w=800&sz=60&hl=en&start=17&um=1&usg=__9gLitht8i7ud-QSgy-x_rCBvSWM=&tbnid=TUGSVoemsGTp1M:&tbnh=107&tbnw=143&prev=/images%3Fq%3D02%2Bnissan%2Baltima%2Bhid%2Binstall%26um%3D1%26hl%3Den%26safe%3Dactive%26rlz%3D1T4GGIH_enUS216US216
hope this helps my email is matthewsg2007@yahoo.com let me know how it comes out

Posted on Sep 19, 2008

jschoon77
  • 55 Answers

SOURCE: Location of oil filter on Nissan Altima 2005

The oil filter is located behind the right (passenger) inner fender cover. It is right next to the crankshaft pulley at the bottom of the front of the engine facing toward the right front wheel. I do not have a picture at this time.

Hope this is helpful!


Nissan Scope Technician- 10+ years experience in Nissan dealership.

Posted on Nov 04, 2008

mrgreenz
  • 962 Answers

SOURCE: head light 2005 altima

you have to remove the bulbs from inside of the hood in the engine compartment. in some cars you have to remove some "pins' and remove the entire headlight assembly.. You then remove the holder where the lightbulb is located and replace the bulb.

Posted on Nov 18, 2008

emissionwiz
  • 75051 Answers

SOURCE: IAT Sensor Location on a 2005 Nissan Altima

It is small and round (2 wire connector) and located either in the flexiable air intake hose to the engine or in the engine air filter housing.

Posted on Nov 18, 2008

  • 383 Answers

SOURCE: need to install a thermostat of a nissan altima

Dear Guest: If you have some reasonable mechanical aptitude, it is a simple task on this engine to do.
The thermostat is located near the front to the engine (the side closest to the belts) and on the side where the radiator is.
Follow the top radiator hose to the engine and you will have found the thermostat housing.
1. Make sure the engine is cool before doing this job.
2. Get a drain pan and drain the coolant from the radiator. The drain **** for the radiator is located at the bottom of the radiator. Some have an end which can be turned without tools and others require a flat screw driver to unscrew the fitting from the bottom of the radiator. Make sure you remove the radiator cap, as it will drain much faster. Once drained, put the drain **** back into the radiator. Be careful and DO NOT OVER TIGHTEN IT! It will snap off in the radiator!
3. Release the hose clamp which secures the hose to the thermostat housing and then grasp the hose at the neck where the clamp was and try to rotate the hose on the housing. DO NOT try to just pull the hose off. Break it loose first by rotating it on the housing. If it is stuck, get a small screw driver and carefully, slide it in between the hose and the housing, working it around until you can rotate the hose. At that point you can remove the hose and push it off to the side or take it loose at the radiator as well. CAUTION!!!!! the radiator tanks are plastic and will break if you are not careful!
4. There are 3 bolts which retain the housing to the cylinder head.
Typically the bolt head size is a 10mm. Using a 10mm socket, rotate the bolts in a counter clockwise direction, removing all three bolts. There are some that did use a 12 mm bolt head size. Most of the time the housing will just come loose. Sometimes, it will stick. If so, a light tap will break it loose. Pay attention as to how the thermostat is positioned in the cylinder head prior to removing it. Most of the time it will pop out easily or you can easily pry it out with a small screw driver. CAUTION!!!!
Do not damage the mating surface where the gasket seals.
Carefully clean the old gasket off. A single edge razor works fine.
5. The thermostat has a top and a bottom. If you look closely, you will see a place in the outer parameter of the thermostat where there is a small hole, often with a little metal tab which projects through the other side and is able to jiggle some. This is a small bleeder to help bleed the air trapped in the system when it is installed. This part of the thermostat must be at the 12:00 position.
Additionally, make sure the part with the hoop is sticking out toward you. The cylinder head has been machined to allow the thermostat to fit flush with it when installed properly.
6. Clean the old gasket from the thermostat housing. Nissan utilizes a liquid gasket sealer (silicon) which you apply a "SMALL" bead around the water inlet (the cylinder head side), let the sealer skin lightly and then put the housing in place making sure that the thermostat had remained seated during the installation. If it had come loose and you try to tighten the bolts, you will crack the thermostat housing.
7. When you tighten the thermostat housing bolts, there is a torque specification however most people don't have torque wrenches which measure in inch pounds. For those who have a torque wrench, 10mm bolts:56.4-66 inch lbs, 12mm bolts 12-14 ft lbs.
I have found that the easiest way to keep from over tightening the bolts is to grab the ratchet from the head and tighten the bolts because you don't have the leverage at that point.
8. Let the silicon dry for 10 minutes and and then fill the system back up with coolant. Reattach the hose and clamp being careful not to over tighten the hose clamp.
If you are replacing it, not more than a 50/50 mix. There is no special bleeding procedure Nissan has for this car. Just fill the radiator with coolant, turn the heater inside the car to the heat position to allow coolant flow into it as well, because it too is part of the cooling system in terms of coolant capacity. I usually fill the radiator until it shows 1/2 way up the tank. As the engine warms up,prior to the thermostat opening, more often than not, the coolant level will rise dramatically before it drops. Once the thermostats has opened top the system off, put the cap on and let it run for a while and watch for leaks. Take the car on a short loop and then recheck for leaks again. If everything has gone well, the temperature will read normal and no coolant will be leaking.
Hopefully this should be sufficient to answer your question.

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install the thermostat on 2005 Nissan Altima 2.5?


This is a pretty easy repair. Your vehicle has 2 thermostats. One on the driver side of motor just below the intake manifold and the other in the center of motor just below the intake. I would flush the coolant system aswell.
Here is a link on how to do it. I have recently done one and these steps are right on.

http://www.ehow.com/how_7868154_do-replace-two-thermostats-altima.html?utm_source=eHowMobileShare&utm_medium=email&utm_campaign=MobileShareTest1

Apr 20, 2015 | 2005 Nissan Altima

1 Answer

Show a diagram for replacing a thermostat on a nissan altima 2005


Today is your lucky day Michelle,here's a link to replace your thermostat,need more help,let me know,k. Repair Guides Thermostat Removal Installation AutoZone com

Jan 12, 2014 | 2005 Nissan Altima

1 Answer

2005 Nissan Altima heat problems


You may have a thermostat stuck open,Have it replaced.on older cars the thermostat would stick shut and people would burn up there engines.Now they make them stay open when they fail so you dont overheat your engine and blow it up..

Feb 17, 2013 | 2005 Nissan Altima 2.5

2 Answers

My 2005 nissan altima has no heat


If before you change the thermostat,if the car has always had that thermostat in it,and the heater heated before and the engine is not overheating,the thermostat is most likely fine.But that is the cheapest way to start,Lissa is on the right track there.The heating element may need replaced..

Nov 29, 2012 | 2005 Nissan Altima

1 Answer

The heater in my car will not work while in park or idling. But, as soon as I put my foot on the gas pedal, my car instantly blows hot air. But, if I stop at a red light, or if I place my car in park, it...


I have the same problem. When my dealer changed my coolant I now seem to have a stuck thermostat. They are denying they did it. I haven't changed the thermostat yet but that is the problem.

Dec 27, 2010 | 2005 Nissan Altima

2 Answers

NISSAN ALTIMA '05 NO HEAT AT IDLE HEAT WHEN MOVING


I'm having the same problem, no heat at idle. I replaced the waterpump/both thermostats/belt and radiator. I'm still having the same problem. any ideas?

Thanks,

Kurt

Jan 27, 2010 | 2005 Nissan Altima

Not finding what you are looking for?
2005 Nissan Altima 2.5 Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...