Help can a 95 ford f150 transmission fit on a 88 ford f150 the both have the same engine but different year

Hard parts, I believe so. mostly suspension engine and same transmissions. Just watch out for wiring. 94 had OBDI then it switched to ODBII in late 95.

Here, is what I think you are asking. The TBI intake from a 91 will fit the same size engine from 88 to 95. The Vortec didn't come out till 96 I believe. So if your 91 is the original engine then it is not a Vortec motor. If you want to swap your 5.7 with another 5.7 (5.7 = 350) Then the 88-95 should work, Just double check your sensors and locations as the plugs may be different and or in different locations. I know my 88 GMC and my 94 chevy (both K1500's) were a little different. Hope this helps.

you need a flywheel that in balanced with the 300

I guess the short answer is I doubt it.
The 460 engine should be a big block and the 351 is probably a large 302. I would expect the bolt pattern for the bell housing to be different along with the mounting and the tail shaft.
The 460 should have a bigger drive shaft than the 351.
If you can get the model of the 460 trans a salvage yard should be able to tell you if they will interchange.

That depends on your engine size and setup, however, edlebrock will have a aftermarket intake that will direct fit to your truck.

Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

They will fit but the oilpans, intakes, brackets, motor mounts, exhaust manifolds and a lot of other items will be different

physically it will fit ,, but you run into problem with the fuel delivery and sensors because of the years difference,,, you will have to use the intake off the 95 but use 5.9 injectors and use all the sensors off the 95

yes this will fit, model years 88-97 will fit. I would recommend the newest model you can get, as they improved internal hardware after 93. hopefully this helps

if they are same size engine, it should be fine