Question about 2001 Buick LeSabre

1 Answer

Load Levelers The load levelers keep on turning on and off when driving. Is there a way to turn off the load levelers? or is there a simple inexpensive repair that can be done? This problem occured when the car was transported on a car carrier.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 599 Answers

Idiots..pro haulers know to disconn the battery before transporting so that doesnt happen... back charge the fools the repair costs to change out your levelers.. remove fuse/relay to leveling system and check aftermarket (monroe or gabrel) for replacement system.... also..first...disconnect battery for 10 minutes to clear settings and zero everything ... that may solve this simply

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the tow bar down load of a Jayco Penguin please? Buying a new car and need to know please.


it is not the down weight of the van that is critical but the ball weight capacity for the vehicle
the down weight can be lessened by the use of load levelers or sway bars
most ball weights are 150 kgs to 350 kgs depending on the vehicle being used
before you buy the car ask the salesman or read it in the owners manual for the car

Feb 17, 2017 | Cars & Trucks

1 Answer

OK I do have Towing capabilities for my Captiva 7 LTZ Diesel. The caravan is rated at 1750 kgs loaded. Question- What is the towing capacity of a Captiva 7 Diesel


carpoint.com.au suggests a tow limit of 1700 kgs with a max ball weight of 170 kg
if it is a 2.2 L diesel it is less than a 3.2 L petrol which is 2000 kgs
in your configuration you will need anti-sway bars or load levelers to get the ball weight down to the 170 kgs
then if you load the van for touring it will be well over the specs for the vehicle
the towing capacity should be on the plate inside a front door pillar along with tyre sizes and pressures

Jan 19, 2017 | Cars & Trucks

1 Answer

Steering wheel slightly hard while turning my car


The two systems in question are not related, so you have two issues to deal with. The power steering issue could be as simple as a glazed or loose drive belt. When you turn the wheel, the power steering pump puts additional load on its pulley. If the belt is glazed or loose, it can slip momentarily and cause stiffness in the steering. Low or contaminated power steering fluid can also cause this. Moisture in the fluid will cause problems since water compresses differently than hydraulic fluids. As far as the transmission is concerned, there are a lot of things that can cause late shifting, from vacuum issues to solenoids, to fluid quality and level.

Nov 22, 2015 | 2002 Nissan Pathfinder

1 Answer

My 26be siesta motor home is missing. Standard equipment levelers?


This is not a big deal. If you do not want to go to the expense of replacing the original hydraulic levelers, you may use scissor jacks or bottle jacks to manually level the motor home.

May 05, 2015 | Cars & Trucks

1 Answer

Squeeling while Wheels turn


Slipping belt, low fluid are possible causes. Usually the turning of the wheels adds an additional load the the power steering pump which the belt needs to overcome. If the belt is old ( had shiny sections, missing chunks ) it needs to be replaced. Also, if the belt tensioner is frozen, it may not be able to keep the appropriate level of tension on the belt to keep it from slipping when the pump is under higher load.

Mar 07, 2014 | Pontiac Montana Cars & Trucks

2 Answers

Battery goes dead in about 4 days in 1996 buick park ave


most obvious cause could be the alternator ,one of the diodes has gone draining the battery or the battery itself its difficult to know without checking it out .Try disconnecting the battery and if it still goes flat then you know its a faulty cell in the battery .if it doesnt then try disconnecting the big thick cable on the alternator and see if that stops it

Dec 26, 2012 | 1994 Buick Park Avenue

1 Answer

TE LOAD LEVELERS ARE NOT WORKNG, CAN I REPLACE THOSE LOAD LEVELER SHOCKS WITH ANOTHER TYPE SHOCK OR MUST I USE THE SAME SHOCK TAT IS STOCK?


are you talking about the air bag suspension system or the shocks themselfs???if your car is on the ground and not staying up it would be the air bag suspension and those can be changed to metal spring suspension. if shocks then the answer is: yes go buy at auto parts.

Sep 06, 2011 | 1998 Lincoln Continental

1 Answer

Load levelers must be leaking, the air pump is running


No, you may want to replace the shocks though. You can leave the leveler disconnected and replace your shocks with regular shocks.

Jun 05, 2010 | 2002 Buick LeSabre

1 Answer

2005 chevrolet venture load levelers not working


had the same problem with my ford a few years back, found that the rubber seal on the piston in the compressor had run dry and it was too hard for the compressor to push the piston up and down the bore which cut the power to the compressor and you had to stop the car turn it off for a couple of minutes and restart it and the compressor would pump air for another couple of minutes and stop again.
I solved the problem by replacing the shocks with a pair of pump up shocks that have a valve like a tyre valve and you pump them up at the service station
hope this helps

May 25, 2009 | 1999 Chevrolet Venture

Not finding what you are looking for?
2001 Buick LeSabre Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...