Question about 1995 Chevrolet Lumina

1 Answer

Ignition switch won't turn and car won't go into gear

Ignition switch won't turn & car won't go into gear

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try tapping in key try some wd30 in switch and wiggle as far as trans is concerned it wont go into gear with out key being turned

Posted on Feb 18, 2009

4 Suggested Answers

seanpwright
  • 2030 Answers

SOURCE: replaced ignition switch, now having problems shifting and the ca

Either something came lose as it was not installed properly or something was dropped in the column to jam things up

Posted on Aug 27, 2009

cansmo
  • 2431 Answers

SOURCE: 1997 ford tbird 3.8 ignition switch problem. Car

The ignition electrical switch itself is bad its along the steering column the fix is a replacement

Posted on Jun 08, 2011

emissionwiz
  • 63661 Answers

SOURCE: why wont my car switch gears when turned on?

I assume this is a manual transmission, so in that case you have a clutch problem, how does the clutch pedal feel, soft allot of free play? Goes to the floor with no resistance?

Posted on Nov 30, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford windstar won't start after changing safety neutral switch?


You need to adjust the Switch, it thinks you are in Gear

Apr 09, 2013 | 2000 Ford Windstar

1 Answer

My 98 carrolla ignition switch won't turn I got it


Hi Anthony,could be your neutral safety switch,here's a link on how to replace and here's the part.And if I am wrong at the neutral safety switch and it is the ignition switch is bad,here's how to replace.Here's the part.

Mar 24, 2013 | Cars & Trucks

1 Answer

I have a 98 Chevy Malibu Ls and the ignition won't


Inspect the old ignition cycle which is out.Is there any problem noticed of Ignition cylinder getting worn out.
Because when issue of ignition not turning off,its faulty ignition lock cylinder or faulty ignition switch.I suggest re-inspect the new ignition cylinder.
For more help,click the help link mentioned below:----

Ignition Switch Will Not Turn Off?
http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
----------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-------------

Ignition Problem Troubleshooting

http://whoisbyme.blogspot.in/2012/07/ignition-problem-troubleshooting.html

------------------

These will help.

Thanks.

Feb 04, 2013 | Cars & Trucks

2 Answers

1997 taurus key won't turn in the ignition, gear selector won't go into gears


Usually a sign the tumblers in the lock cylinder have worn out or jammed.
You may have to get the lock cylinder drilled out and replaced.

Jan 13, 2013 | 1997 Ford Taurus

1 Answer

Steering wheel won't lock, key won't come out


If the ignition normally only locks with the vehicle in park position, then check the switch on the gear lever mechanism is working.
If not, then you'll have to jiggle and wiggle that key out or replace the ignition lock.

Nov 10, 2012 | Volkswagen Cars & Trucks

1 Answer

I can't get my Aztek Gear Shift button to press in. It is stuck in park. I have tried turning the key and it will turn but the button won't budge.


most likely it is ur brake pedal switch, it just behind the brake pedal arm, this switch must be triped by pushing the brake in order to shift into gear, if switch goes bad u cant shift. best of luck

Nov 05, 2012 | 2003 Pontiac Aztek

2 Answers

My husband turned off our Chevy Trailblazer without putting it in gear and now it won''t start and the gear shift is lock up. What do you do to fix it????


first make sure battery isn't dead because if he cut it off in gear then the switch couldn't cut the power off and it'll run the battery down and there is a electrical solenoid that allows the shifter to move if theres no voltage than the shifter want go into park and the ignition switch want turn off.

Dec 27, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

Replaced ignition switch, now having problems shifting and the ca


Either something came lose as it was not installed properly or something was dropped in the column to jam things up

Aug 27, 2009 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63577 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...