The fuses are still good and the bulbs are new and my blinkers nore hazard lights will flash on my wife's 2001 Plymouth Neon. I am out of ideas and I'm worried that I may actually have to take it to a mechanic and loose a lot of money.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
At this point you will need to replace the multifunction switch. It looks like used may be a good option for your vehicle. This is a relatively easy part to replace. You will need a couple TORX sockets but other than that its pretty straight forward once you remove the column covers.
Hopefully not the most likly cause is that the new front lights aren't hooked up or the front bulbs are out. A hard shake to a light bulb will make them fail and the running lights can still work. Try the lights on hazard flash and look at all of the lights any bulbs that should flash that don't should be changed. but if none of them work we'll have to look deeper as the fuse for turn or hazard could be blown. After any kind of crash all the lights need checked as any numbewr of them could be knocked out
have you walked around and check the turn signal bulbs and sockets for burned bulbs and/or corrosion? if so then you might want to look at getting a new turn signal handle " stalk" . good luck and let me know what you find out.
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.