Question about 1996 Oldsmobile Cutlass Ciera

2 Answers

Turn signal not flashing

1996 Oldsmobile Cutlass, when left turn signal is turned on, it does not flash, right turn signal is hesitant to flash, but still does. How can I fix this?

Posted by on

  • jerseyguy200 Feb 11, 2009

    The right turn signal won't flash, even after changing both from and rear bulbs. Left still flashes. I cannot locate the flasher(s). The only fuse panel is inside the glove box, but not any flasher(s).

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Most likely cause is the flasher relay located under the drivers dash in the fuse panel. This relay is round and may be metal. Replace it with an electronic flasher relay. Pay the ten bucks and have trouble free service for a lifetime.....
Good Luck.
Philip

Posted on Jan 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Is there a relay replace for left signal and/or fuse for left signal?

Posted on Mar 11, 2009

  • asamilo Apr 13, 2009

    How do I fix it?//////

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 94 CUTLASS AND I REPLACED THE FRONT DRIVERS SIDE TURN SIGNAL NOW I HAVE CONSTANT LIGHT NO FLASH I TRIED THE WARNING FLASHERS AND IT FLASHES


you should replace the automatic turn flasher ... you should open your dashboard from right side ... it 's back of the fuse box ...

sorry about my bad english ;)

Aug 16, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

My turn signals did not work - left or right.


OK, did you try changing the flasher under the dash on the driver's side?

Jul 11, 2010 | 1996 Oldsmobile Cutlass Ciera

2 Answers

How do you fix a turn signal when the right turn signal blinks but when using left turn signal it just stays solid.?


most likely one of the bulb ons left side is burned out. Replace the burned out bulb and it should flash.

Mar 10, 2010 | 1996 Oldsmobile Cutlass Ciera

1 Answer

RIGHT TURN SIGNAL ONLY, WILL NOT FLASH. lEFT AND


your flasher is bad. Even though all 4 hazards flash,it is still bad.

Feb 27, 2010 | 1996 Oldsmobile Cutlass Ciera

2 Answers

Left brake light is out I've changed the bulb do I need to check the wiring for a short


not unless the bulb is constantly burning out or their is no power to the bulb socket

Jan 17, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

My turn signals come on but want flash. Where's


Front seating area, driver side, under dash, mounted on passenger side of steering column

Sep 08, 2009 | 1994 Oldsmobile Cutlass

1 Answer

93 Oldsmobile Cutlass


check for a crossed filament in the brake lamp bulbs on the right side. have seen this many times before- usually at 5:00 on fridasy when i was on the way out the door
good luck

Aug 17, 2008 | 1993 Oldsmobile Cutlass Ciera

2 Answers

Turning signals have stoped flashing.


The hazard flasher is located in the convenience center, under the dash, on the left side kick panel. The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car.
hope this helps!

Jul 25, 2008 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1996 Oldsmobile Cutlass Ciera Logo

1,098 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...