Question about 2000 Chevrolet Blazer

1 Answer

Replacing headlight on 00 Blazer

I can't figure out how to get the headlight housing out to replace the bulb. It took me 30 seconds to do it on my wife's VW but this is nuts.

Posted by on

  • 1 more comment 
  • chalky16 Jan 17, 2009

    Never mind I figured it out.

  • Anonymous Mar 03, 2009

    HOW TO REPLACE THE HEADLIGHT

  • Anonymous Mar 03, 2009

    HOW DO I REPLACE THE HEADLIGHT ON MY 200 BLAZER

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

There are tabs on the back of headlight that you pull upward and the whole assembly comes out. and in the back you can remove bulb. these tabs are sometimes plastic or metal use a flashlight sometimes they blend in with the surroundings.

Posted on Mar 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the indicator bulb in the front? I can't find a way to do this without removing the entire headlight.


I have found a professional video published on YouTube of the entire process of replacing the bulb on a 1998-2005 Chevy Blazer.

Nov 09, 2011 | 1998 Chevrolet Blazer

1 Answer

How do i replace the headlight bulb on a f-150


Headlight bulb - replacement
Warning: Halogen gas filled bulbs are under pressure and my shatter if the surface is scratched or bulb is dropped. Wear eye protection, gloves, and do not touch surface of the bulb with your fingers because oil from your skin could cause it to overheat and fail prematurely, If you do touch the bulb surface clean it with rubbing alcohol. Try to handle bulb grasping only the base whenever is possible.
1. Remove headlight bulb cover from the back of the headlight housing on which side you replacing bulb.
2. Disconect the electrical connector from the bulb holder.
3. Rotate the headlight bulb retaining ring counterclokwise as wieved from the rear.
4. Withdraw the bulb and the retaining ring from the headlight housing.
5. Remove the bulb from the socket.
6. Without touching the glass with your bare fingers, insert the new bulb into the socket and then into the headlight housing. Install and tighten the retaining ring by turning it clockwise.
7. Plug in the electrical connector, test the headlight operation, then close the hood.

Feb 19, 2010 | 2009 Ford F-150

1 Answer

How to change headlight


This is the same for the pick up as is the Trooper:

Aerodynamic Type

e5d8044.gif
Replacing a headlamp bulb—1994 Trooper shown


8391601.gif
Replacing a headlamp bulb—1994 Trooper shown


  1. Disconnect the negative (−) battery cable.
  2. Open the hood and disconnect the headlight bulb electrical connector.
  3. There are two possible designs. For the first design, turn the bulb to remove it from the housing, for the second unscrew the retaining cap and remove the bulb.

    WARNING Do not touch the glass portion of the halogen bulb. Any contamination on the bulb may cause the bulb to burst when turned ON. If the bulb is contaminated, clean the glass portion with rubbing alcohol.

  4. Hold the bulb by the plastic portion only. Install the bulb and connect the wiring harness. Make sure the sealing ring is in place.


Non-Aerodynamic




3dbcbc6.gif Replacing a sealed beam headlamp—1990 Amigo shown

  1. Disconnect the negative (−) battery cable.
  2. Remove the front grille and/or headlight bezel.
  3. Remove the headlight bulb retaining rim, headlight and disconnect the wiring.
  4. Before installing, spray some silicone grease into the bulb socket.
  5. Connect the wiring and install the bulb.
  6. Install the retaining rim and grille.
  7. Adjustment: turn the adjusting screw (A) for vertical adjustment. Turn the screw (B) for horizontal adjustment.

Feb 14, 2010 | 1994 Isuzu Pickup

1 Answer

Replacing my headlight bulb in my kia amanit 2004


  1. Open the hood of your KIA Amanti and look behind the headlight that has gone out. Locate the round knob on the back of the headlight.
  2. Turn the knob counterclockwise 1/4 of a turn and gently remove it from the back of the headlight. Carefully remove the electrical cable within the headlight housing that is attached to the back of the headlight bulb.
  3. Locate the metal clip that holds the light bulb in place by pushing the clip arm straight in and sliding it down. Remove the bulb from the headlight housing.
  4. Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight housing.
  5. Turn on the headlights to verify that they are in working order.

Nov 03, 2009 | 2004 Kia Amanti

2 Answers

Replace low beam on 2000 LHS


The headlight housing must be removed to access the bulbs on the back of the housing. HOWEVER!!! you must take loose the bumper on the side you are replacing. To do this you also have to take loose the inner finder and turn you wheel sharply in the opposite direction of the bulb to be replaced. There is a 10mm nut you will have to remove inside as well as multiple plastic fasteners along the inner finder and across the front under the hood. Bulb just twist out to remove once the housing is removed. Also, resist the urge to use a very large hammer. Use caution when pulling the plastic bumper out where the 10mm nut was removed, the stud can easily scratch the paint while working the housing out of its socket.

Jun 25, 2009 | 2000 Chrysler LHS

1 Answer

How to change headlights on 2004 ram1500


If you are replacing the headlight bulbs, rotate the bulb retaining lock ring counter-clockwise, pull retainer out of headlight housing and disconnect electrical connector. On the drivers side, you have to remove the fuse and relay box screws and move the box to the side to access the headlight bulb. If you are replacing the headlight housings, there is a push pin and 2 screws on the inside, behind the hood and one screw on the outside at the bottom. Remove these and pull the housing out enough to remove the bulb retainers.

Jun 07, 2009 | 2004 Dodge Ram 1500

1 Answer

How do I change the headlight on 00 toyota echo?


You gotta twist the whole thing, before you take off the wires from the back of the bulb about 45 degrees, then pull straight out. It's not "screwed in" like a light bulb in your house. I just changed mine, and had to figure it out. Took me a minute, but I got it. It's a small space in there. Good luck!

Mar 13, 2009 | 2000 Toyota ECHO

1 Answer

Replacing the headlight...


USE LARGE PLIERS AND TURN SLOWLY LEFTY LOO SEE.

Jan 17, 2009 | 2000 Mitsubishi Montero Sport

1 Answer

Replacing tag light


You probably figured this out by now, but in case you haven't... Reach up behind the rear bumper, rotate the bulb holder counterclockwise, then withdraw the holder from the housing and pull the bulb out. In some instances, the license light housing is held to the bumper with clips, and if you have a step on the bumper the housing is removed by pulling the housing upwards while pulling out at the bottom.

Aug 30, 2008 | 1999 Chevrolet Blazer

2 Answers

Replacing the headlight bulbs on 2005 Ranger


Having just purchased a 2002 Ford Focus I found that the passenger side headlight had gone. Stumbled accross this thread and thought "looks like a pain".
Popped to Halfords and picked up a H1 bulb, went home and had a look under the bonnet.
Armed with just a screwdriver I managed to change the bulb within 10 mins. Flicked the headlight cover off using the screwdriver for a bit of leverage. Unpluged the headlight and flicked off the retaining clip. Removed the bulb.
Fitting was even easier - Put bulb in place, clip the retaining clip in place, plug in and replace cover.
Job done within 10 minutes with no prior experience of Fords.
Hope it helps
IMPORTANT!!! The retaining clip does NOT just flick off. Tried that and broke the plastic stop that holds the retainer clip and allows it to apply tension to the bulb! The retainer wire is held in place on the bottom by a screw and clip on the bottom and is locked into a plastic clip on top. To remove the wire, push the wire down and towards the passenger side of the car, it will dislodge and you can then lower it to remove the bulb. Once the bulb has been changed, you want to replace the wire the same way to protect the plastic clip. I don't know what I will do about the plastic clip now, the retaining wire has no tension and I'm afraid the bulb will not remain seated properly. However, knowing what I know now, I agree with the above answer: Done in 10 minutes without prior experience with Fords.
=== Just finished doing this. A small mirror and a flashlight make this job simple. It's very easy to do once you can see the top of the clip.
small mirror and flashlight are essential, look at the way the retaining wire seats before you unclip it. flat side of the bulb houseing sits at the bottom of the access hole. retaining wire clips bottom to top. I had a hard time with seating the new bulb and had to figure out the retaining wire clipped from bottom to top because I didn't look at it before I unclipped it. obviously fords designed this for ease of manufacter with very little regard to the average layman who would do the replacing.

Jun 24, 2008 | 2005 Ford Ranger

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...