Question about 1995 Jeep Cherokee

1 Answer

Heater, wipers,and radio

jake-maine
my 95 jeep 4x4 4.o 2dr. my heater, wipers,and radio is not working when it is running but is when it is in the start position. Also my radio will work when running if my headlights are on. Is it fuse or egnetion$

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Likely you have a bad ignition switch AND, the radio probably was wired into the headlamp circut, Move the radio hot lead to an "acc" port on the fuseblock.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 jeep grand cherkee clicking noise passenger side under dash radio won't come on while car is running or key in start position but will in acessory position also interior lites blink while car i


try this.. disconnect the vehicle battery entirely, connect a 10 amp battery charger to the car connectors matching the terminal leads..and power the car with the charger..you should hear a hum or buzz in whichever relay or circuit breaker is bad.. replace this relay and the lights and stuff should work..the charger will not direct-short but the guage may go full over indicating a malfunction..or extreme load.. maybe a window switch might be fried..you should be able to hear any issues as long as power is coming from the charger only...repost findings..

Jan 27, 2013 | Jeep Grand Cherokee Cars & Trucks

1 Answer

The whipers on my 93 jeep wrangler wont work


when they do not work turn the key to the run position, the vehicle does not need to be running, and the wipers set to high speed whack the wiper motor with the handle end of a large screwdriver. if the motor starts to work replace it.

Nov 30, 2012 | 1993 Jeep Wrangler

1 Answer

My 96 jeep cherokee runs fine. But My stereo, wipers, and heater only work when the key is turned back. When I start the jeep or even have key in on position it doesn't work.


Hi, you'll need a new ignition switch. The part is $34 at autozone. If you have a steering wheel puller and a decent set of tools (including torx drivers), you can do it yourself. I can send instructions. Just tell me if you have an airbag on the steering wheel, as the instructions are different in that case.
Thanks for using FixYa.

Jan 18, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

1989 Jeep Wrangler no power when key is in on position


Honestly, it sounds like a bad ignition coil. When they get corroded inside they will draw power on a scale much higher than anything else on the vehicle. It is a coil and it's job is to take a little power and make a lot of it. If it's only when the key is in the "run" position, that is likely the case. The only real difference between the two positions is that in the run position there is power being delivered to the ignition system. Good luck.

May 05, 2010 | 1989 Jeep Wrangler

1 Answer

Wiper will not work on 95 jeep wrangler? What to


start with fuse then switch and the motor

Dec 19, 2009 | 1995 Jeep Wrangler

1 Answer

I have a 99 Jeep Wrangler and the turn signals, wipers, and radio work when i turn the switch back to AC. But when i actually start my car none of the three work. No idea what it could be?


Very likely the ignition switch is bad. both run and accessory terminals should be engaged in the run position. Sounds like that's not happening.

Nov 18, 2009 | 1999 Jeep Wrangler

1 Answer

The blinkers and wipers and radio dont work unless the key is turned backwards, if the jeep is running none of these work, this is a 1999 jeep wrangler tj


sounds like the accessory side of the ignition switch is not working. When the key is on run position the same wire that is hot coming out when the key is turned to accessory should be hot, along with the ignition wire that runs the engine. (hot meaning it has 12v)

Oct 21, 2009 | 1999 Jeep Wrangler

1 Answer

1999 Cherokee Jeep sound system


the power amp feeds off fuse 26 in the fuse block under the hood...its a 20 amp fuse...cant find a pic that shows the exact position

Nov 01, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
1995 Jeep Cherokee Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...