Question about 1995 Chrysler Sebring

1 Answer

1995 Chrysler Sebring 2.0 DOHC. Missing sensors on transmission?

I just had to do a transmission replacement on my Sebring and I have come to a complete stop because of some electrical connections. I have 3 plugs that i cant figure out were they go. Is there a website with detailed information about sensors on the tranny? And aslo, is there anyway that I got a different transmission from the junk yard? All the bolts lined up perfectly, even on tourqe converter. The tranmission came out of a 1995 Dodge Avenger with the same engine size and layout. HELP PLEASE!!!

Posted by on

  • formenmy5 Jan 17, 2009

    i already thought that up, but....i already took the old one back to the junk yard for the core...lol...i think i might just have to go back to the junk yard and take a look at all the layouts or something.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

The best advice i can give is if you have the old trans is to look at it match up the plugs with the connectors and you should bo able to see whewe go hope this helps lol

Posted on Jan 17, 2009

  • Roy Hyre
    Roy Hyre Jan 17, 2009

    if there is anything eles i can help with feel free to contact me i will be happy to help

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The location of the map sensor on a 1996 chrysler convertible sebring jx 2.4 engine


1996 Chrysler Sebring Convertible 2.4L SFI DOHC 4cyl

The MAP Sensor is located: Under hood, center, lower engine area, passenger side of engine, mounted behind alternator

25852880-d2xccmsr3fz4kuvb3ps3pyax-1-0.jpg

Sep 06, 2015 | Chrysler Cars & Trucks

2 Answers

I have a 96 Chrysler Sebring. I replaced input n output sensors on tranny. My speedometer still doesn't work. Is there a cable from speedometer to tranny


if you have done all the above and the sensors and wires are good give these guys a shout, they maybe able to help

southernelectronics.com

Apr 09, 2015 | 1996 Chrysler Sebring

1 Answer

Location & aprox. price for oxygen sensor bank 1, on a chrysler sebring 2004, 2.4liter, dohc, non-convertible?


A four cyl engine only has one bank. So in your case bank one sensor one is in front of the catalytic converter, and sensor two is after the cat.
The sensor can cost from $25 to $85 dollars depending on which one and your location.
Keep in mind the code 420 can be caused by other factors than the O2 sensors.

Feb 21, 2013 | 2004 Chrysler Sebring

1 Answer

2004 chrysler sebring 2.4l dohc.


Have you ever replaced the timing belt?? If not the problem is likely to be a loose worn out timing belt. A floppy belt will play havoc with the sensor signals and trigger a check engine light and a camshaft sensor code.

Jun 22, 2012 | 2002 Chrysler Sebring

1 Answer

1998 Chrysler Sebring convertible Not shifting into drive check engine light came on, error code PO715


DTC P0715 CHRYSLER - Input Speed Sensor 1 Circuit
P0715 is detected when TCM or ECM does not receive the proper signal from the sensor.

The input speed sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM).

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible shifting problems

Possible causes
- Transmission speed sensor circuit is open or shorted.
- Poor transmission speed sensor circuit connection
- Faulty transmission speed sensor

Hope this clues helps to solve it.

Jun 02, 2011 | 2003 Chrysler Sebring

1 Answer

2005 chrysler sebring 2.4L 4cyl dohc engine wants to start


Get the exhaust system checked,you may need a new converter.

Nov 06, 2009 | 2004 Chrysler Sebring

1 Answer

Transmission does not shift and speedometer does not work


replace the input and output transmission speed sensors, they run about $20 a piece you will need a 1" deepwell socket to easily replace these. It took me about 45min or so without deepwell sockets but would have taken about 20min with them.

May 07, 2009 | 1995 Chrysler Sebring

Not finding what you are looking for?
1995 Chrysler Sebring Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...