Question about 1996 Chevrolet Blazer

1 Answer

How do I get he wiper arm off a Chevy Blazer 2000? I don't see a cap or lid to remove to get to the nut and I don't want to break it by doing it wrong.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Down at the Base of it where it attaches, There are Very Small Tabs that will have to be Pulled up with Pliers. Then you can work them off. They will still be tight though, Just work back and forth While pulling on the Base.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Chevy Lumina APV Wiper arm removal


Lift your hood and look for the end of the wiper arm that is attached to the vehicle and pry the end cap off to exspose the nut, remove the nut with a ratchet and socket and use a small gear puller to pull the wiper arm right off of the shaft. Don't try to pry it off from the bottom because you'll break the plastic cowl underneath and still won't have the arm removed.
The motor is usualy located under the vent that runs along the bottom of the windshield...


I hope this helps.....

May 16, 2013 | Cars & Trucks

4 Answers

How to remove windshield wiper arms?


pull the wiper arm up, pull the wiper back then pull it hard down the wiper arm once the loop releases the wiper.

Mar 09, 2011 | 2000 Saturn L-Series

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    2 Answers

    Rear windshield wiper does not cover the intended area how to remove rear windshield wiper arm


    IF YOU HAVE A PLASTIC CAP ON ARM REMOVE IT AND THE NUT UNDER IT, AND LIFT WIPER ARM OFF.

    Jan 02, 2011 | 2000 Dodge Caravan

    1 Answer

    Wipers will not move, makes noise and there is power to the motor. Motor was replaced. Someone told me that the arms probably moved to far and are now stuck, how do I fix this?


    Windshield Wiper Blade & Arm Removal & Installation Front To Remove:
    1. Mark the location of the wiper on the windshield.
    2. Remove or disconnect the following:
      • Nut cover
      • Nut from the wiper arm
      • Wiper arm
    Wiper arm mounting nut gm_truck_s10_w-wpr-arm_ret-nt.gif
    To Install:
    1. Install or connect the following:
      • Secure the wiper arm with the nut.
        1. Tighten to: 17 ft-lb (23 Nm)
      • Nut cover
    Rear To Remove:
    1. Put the wiper arm in the park position.
    2. Remove or disconnect the following:
      • The washer hose from the connector
      • The cap from the wiper arm
      • The nut from the wiper arm
      • The wiper arm from the wiper motor shaft
    Rear wiper arm mounting nut gm_truck_s10_w-wpr-arm_ret-nt_rr.gif
    To Install:
    1. Install or connect the following:
      • The wiper arm on the wiper motor shaft in the park position with the wiper arm resting on the park ramp
      • The nut on the wiper arm
        1. Tighten the nut. Torque to: 17 ft lbs (23 nm)
      • The cap on the wiper arm
      • The washer hose on the connector

    ---
    The wiper motor hopefully is ok, but if the wiper arms were not mounted at the right spot, it could have damaged the motor as it returned to the rest position, unfortunately.

    If there is noise, the noise could be coming from the wiper arm joint being stripped out or the motor itself assuming that the ball joints under the hood and behind the firewall are still connected.

    Check these items, and I'm sure you will get to the bottom of this.

    Good luck on this repair.

    Oct 08, 2010 | 1997 Chevrolet Blazer

    3 Answers

    How do you remove the rear wiper arm on a 2008 town & country


    1. Remove the cap by inserting a flathead screwdriver on the side of the wiper arm to pop it off
    2. Remove the nut holding the arm to the motor shaft
    3. Now for the hard part, put the flathead screwdriver between the wiper arm and the base of the motor shaft. You should be able to wedge it in there so that you can put slight pressure on the bottom of the wiper arm and the base of the motor. Now wiggle the wiper arm and pull up while you turn the flathead screwdriver to help pop it off. Just keep wiggling and turning the screwdriver to pop the arm off.
    4. Once the arm is off it should be obvious why it was so hard to get it off. There are threads on the motor shaft that tap wiper arm when you crank the nut down on the arm. That's why it doesn't just fall off when you take the nut off.
    5.. Put the nut on tightly so that it creates the new threads on the new wiper arm.
    6. Test it.
    7. Put the cap back on.

    Jun 04, 2010 | 2008 Chrysler Town & Country

    1 Answer

    WINDSHIELD MOTOR REPLACEMENT FOR MY 2000 CHEVY C3500 HD


    REMOVAL PROCEDURE
    1. Remove the wiper arms.
    2. Remove the air inlet grille panel.
    3. Disconnect the electrical connector from the motor. IMPORTANT: Do not remove the crank arm.
    4. Loosen the nuts attaching the drive link brackets to the crank arm.
    5. Remove the brackets from the wiper motor crank arm.
    6. Remove the three bolts and the wiper motor from the vehicle.
    INSTALLATION PROCEDURE
    1. Install the wiper motor on the vehicle. NOTE: Refer to Fastener Notice in Service Precautions.
    2. Install the three bolts. Tighten Tighten the three bolts to 7 N.m (62 lb in) .
    3. Install the drive link brackets to the wiper motor crank arm with the right side linkage closest to the wiper motor. Tighten Tighten the link nuts to 5 N.m (44 lb in) .
    4. Connect the electrical connector to the wiper motor.
    5. Install the air inlet grille panel.
    6. Install the wiper arms.

    May 10, 2010 | 2000 Chevrolet 3500

    1 Answer

    How do you replace a wiper arm in a 2001 Chevy Trailblazer?


    01 t-bazer wiper arm is held on by a nut under the plastic cover at the end of the arm. (once nut is removed you may need a wiper puller to remove or carefully heat up the wiper arm with a propane tourch to break it free)
    hope this helps

    Jan 25, 2010 | 2002 Chevrolet TrailBlazer

    2 Answers

    Snow caused wipers


    You'll have to have arm removed and repositioned. If there is a little cap at end where it mounts, snap it up , remove nut, and wiggle arm upward, until off, put wipers in park, set arm back on in proper position & tighten nut. If no nut, there should be a clip on side that you pry out and pull arm off same way. If not successful, a local garage or bodyshop should do it for you for minimal or no charge. Hopefully splines inside arm aren't stripped off. Clean all good before re-install.

    Mar 03, 2009 | 2000 Ford Expedition

    1 Answer

    1984 chevy S10 windshild wipers


    at the arm remove the cap on end and their is a nut remove it 10 mm / Please rate my response thank you very much

    Jan 28, 2009 | 1984 Chevrolet S-10

    Not finding what you are looking for?
    1996 Chevrolet Blazer Logo

    Related Topics:

    195 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    63242 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21981 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...