Question about 1994 Ford Crown Victoria

1 Answer

'94 Ford Crown Vic Headlights

I was wondering how to replace the Dim light bulb in my '94 Ford Crown Victoria, I have no idea how to start.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

They are changed from within the engine compartment... at the rear of the headlight bazels... if it's the side on the battery you may have to remove it.... also don't touch the bulbs with your fingers as that shortens the life of them.

Robert

Posted on Jan 17, 2009

  • Roberta Smith
    Roberta Smith Jan 17, 2009

    I'm still waiting for your reply on the "ask me" page. i do request that you raise the rating on this solution as i would have explained in more detail if you requested it here



    Robert

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight problem


I guess that means replacing the bulbs didn't work? The only other thing might be the dimmer switch. Its located on the bottom of the steering column, about halfway down fron the steering wheel.

Feb 22, 2010 | 1990 Ford LTD Crown Victoria

1 Answer

I have a 1994 ford crown victoria I tried to start it the starter turned over a couple of time then stopped like someone turned off a switch I turned on the headlights and tried to start it but nothing...


reach underneath and hit the starter housing a few times with a hammer,if it now works either replace the brushes in the starter which cost about $20.00 ,or replace the starter which costs about $90.00.(parts only for both estimates)

Nov 23, 2009 | 1994 Ford Crown Victoria

1 Answer

My transmission on my 94 crown victoria seems to


have the fluid changed, the new fluid should cure this.

Nov 02, 2009 | 1994 Ford Crown Victoria

1 Answer

Hi, How do I replace the tail light bulbs in my '97 Crown Victoria? Thanks


Sedans
  1. Remove the screw(s) and wing nut retainers at the rear of the luggage compartment and push the trim away from the back of the light.
  2. Remove the wing nuts retaining the light assembly to the vehicle and the retaining nut from either side of the luggage compartment and pull the light body assembly from the vehicle.
  3. Turn the bulb socket(s) counterclockwise to the stop and remove the socket(s) from the light assembly. Remove the bulb(s) from the socket(s).
  4. Installation is the reverse of the removal procedure.
56c16fa.gif
Push the trim away from the back of the light—1992-98 Crown Victoria

f147c29.gif
The rear tailamp assembly is held by various fasteners

da5bd90.gif
Remove the wing nuts retaining the light assembly to the lower back panel—1992-98 Crown Victoria

e896b59.gif
Remove the nut retaining the light assembly from the side of the luggage compartment

2e1520f.gif
Pull the light assembly away from the vehicle—1992-98 Crown Victoria

Oct 12, 2009 | 1997 Ford Crown Victoria

1 Answer

How do you change a back left turn signal bulb on a 94 ford crown victoria


check inside trunk ,behind turn signal,  twist and pull out

Oct 02, 2009 | 1994 Ford Crown Victoria

1 Answer

Interior: the domelight and courtesy lights stay on in my 94 Vic


There is a "switch" inside the door lock ...it has small ball at the end that retracts when the door is closed.

You can either replace the switch by removing the door panel and get access to it (follow the wire) ...or you can access it thru outside of door lock with small and long scredriver and free the ball with some lubricant.

Hope this helps

P.S. you have to find which door is it

Mar 23, 2009 | 1994 Ford Crown Victoria

1 Answer

94 CROWN VICTORIA FUEL PUMP


Yes you can replace it. It is in the fuel tank. You will need to drain the tank and remove it to gain access to the fuel pump. A floor jack will help when lowering the fuel tank. If you fo to a dealer to do this you will be looking probably around $700.00 to replace the pump.

Feb 17, 2009 | 1994 Ford Crown Victoria

1 Answer

How do I replace bulbs where air condtion switches are ?


pull the AC/Heater control head out and u will find a tiny peanut shaped bulb at the back of the dash display, replace it.

Feb 12, 2009 | 1994 Ford Crown Victoria

1 Answer

'94 Ford Crown Vic Headlights


Are you sure the bulbs are dim? Could the problem be faded lenses? If so, like most of today's plastic lenses, get yourself a lens restoration kit and follow the instructions.

Jan 17, 2009 | 1994 Ford Crown Victoria

1 Answer

Head Lights


If only the headlights are dull and not putting out the correct light, I would suspect a bad ground (earth) connection somewhere in the headlight circuit or the fuse for the headlight circuit. Something is causing excessive resistance and causing less voltage to be provided for the headlights. If all the lights are dimly lit, then I would check the charging system, the battery and the ground cable for the battery, chassis, and engine.

Jun 13, 2008 | 1995 Ford Crown Victoria

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...