Question about 2002 Chrysler Voyager

1 Answer

2.5 voyager crd on 52 plate Not starting

Now I sent the car to my local garage for the injectors to be re-seald , its come back not starting 1st or 2nd key it was taking about 5 seconds to start , did not seem right , now it will not start at all , I have been through the batterie problems and renewed it , the man at the garage said its the imobalizer on the factory fitted alarm ? I personaly think its fuel but how will I test this , I dont want to give it maine dealer I cannot afford it ?

Posted by on

  • gazh1 Jan 17, 2009

    Diesel it is , yes its is factory allarm immobiliser ,and will try the spair key first ,

    Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 22,041 Answers

Petrol or diesel ??,,factory immobiliser ???could very well be ,only need to leave key in pocket with a mobile phone and its a non starter .shouldnt cost more than 200€ to reset the key ,tried the spare key??

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ABS light is staying on all the time. The


you should only need one sensor replaced they are usually buil into the wheel bearing. hope this helps

Apr 13, 2010 | 2004 Chrysler Voyager

1 Answer

My chrysler grand voyager struggles to start in the morning when it does start it blows out a load of smoke.A local garage said it was the glow plugs which he has now replaced but its still not right.I...


We have the same problem and have been told that it could be faulty fuel injector..there are 4 on the car at a cost £182.50 each eek : ( We are taking ours in today for a diagnostic testing so will let you know. We have also changed all 4 of our glow plugs but still not starting properly and thyen other times it is fine. hope this helps a bit.

Mar 05, 2010 | 2002 Chrysler Voyager

1 Answer

Idlind problem


Could be a Mass Air Flow sensor or the O2 sensor.
Probably will need to vosot your local tech or a friend that can "check codes" off the ECU.

Jan 09, 2010 | 2001 Chrysler Voyager

1 Answer

How to remove injectors


Take the bolts out of the fuel rail and lift the fuel rail off the injectors then remove injectors

May 19, 2009 | 2002 Chrysler Voyager

1 Answer

2.5 voyager crd on 52 plate


get a local mechanic to have a look ,sounds like a big fat northerner has owned this car and squashed the elements in the seat.replace the rear electric motor in the door for the window .and radio code should be in the cars books if not you will have to remove and post chassis number of radio and make so this poofty southerner can generate a code for you

Jan 17, 2009 | 2002 Chrysler Voyager

1 Answer

2.5 voyager crd on 52 plate


Hi there, you will need to remove the injector and replace the copper seal on the base of the injector. You do this by de-pressurising the fuels rail, ie, loosen the metal pipe attached to the injector, fuel will spill till all pressure has gone. remove the metal pipe and the multiplug connector too, remove the clamp and bolt holding the injector in place. Gently twist the metal part of the injector body and with an upwards motion remove it from the bore. Clean the bore thoroughly and use a vacuum to remove the carbon as you scrape it away. Once happy everything is clean, replace the copper washer and refit the injector in reverse order as for removal. You will have a sealed injector and no blowing will be heard.

Hope this helps

Cliff

Nov 28, 2008 | 2002 Chrysler Voyager

1 Answer

52 focus estate loss radio code


hi there sharondav are u able to remove unit & look for serial no. on side unit serial no. starts with m & is six figure no.u need radio pins to take unit out which u can purchase at local car accessories or if you ask nicely u can ask u r local ford garage to take unit out it you can i will be able to get radio code for u.

Nov 22, 2008 | 2001 Ford Focus

Not finding what you are looking for?
2002 Chrysler Voyager Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...