Question about 2000 Ford Expedition

1 Answer

Air id warm not hot where is the heater control valve located

Heater control valve location on 2000 ford expedition

Posted by on

  • lillarrygall Feb 09, 2009

    how do i make my heater blow hot heat
    through the vents,panels and floors

  • josefd Mar 12, 2009

    turn heater on and no hot air comes out. The thermostat is new, the lines were cleaned and new coolant added and still the problem persists. HELP!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Remove the glove box and look left blend door motor is sticking

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 Ford Expedition has a stuck a.c., it doesn't heat up. I replaced the Temperature control unit and the motor for my heater actuator, still no heat? Please help?


Its a faulty heater control valve that is located in between the engine and the heater core or just before the firewall.

Jan 31, 2012 | 2002 Ford Expedition

1 Answer

I have a 2000 ford expedition and the heater blows air just not hot air or even warm air.. weve already changed out the thermostat, heater core, heater control valve and it still isnt working.. what could...


Check the vacuum hoses from the switch to the engine compartment. If you manually operate the heater valve on the firewall (follow the 5/8" hose) you will get heat.

Feb 08, 2011 | 2000 Ford Expedition

1 Answer

2000 expedition with auto climate control no heat in front or back heater


check to be sure you don't have air trapped in the system. If engine temp is normal, then heater water valve may not be working (if it has one) or temp control on heater control head is not working for blend door.
If trapped air, have a shop with evac/fill equipment, flush & fill system to purge air.

Jan 11, 2011 | 2000 Ford Expedition

3 Answers

Can not find heater control valve 2000 expedition


what year? for 2000, there are no control valves. It mixes a/c air with heater core air to blend the right temp.

SECTION 412-02: Heating and Ventilation 2000 Expedition/Navigator Workshop Manual
DESCRIPTION AND OPERATION Heating/Defrosting The heating and defrosting system has the following features:
  • Controls the temperature and, during A/C operation, reduces the relative humidity of the air inside the vehicle.
  • Delivers heated or cooled air to maintain the vehicle interior temperature and comfort level.
  • Controls the A/C blower motor speed.
  • Cooling or heating can be adjusted to maintain the desired temperature.
  • Uses a reheat method to provide conditioned air to the passenger compartment.
  • The blower motor draws outside air through the A/C recirculating air duct, except for MAX A/C cooling, when recirculated air is used.
  • All airflow from the blower motor passes through the A/C evaporator core.
  • The temperature is then regulated by reheating a portion of the air and blending it with the remaining cool air to the desired temperature.
  • The temperature blending is controlled by the temperature blend door, which regulates the amount of air that flows through and around the heater core, where it is then mixed and distributed.
------------------------------------------------------------------------------------------------

Dec 01, 2009 | Ford Expedition Cars & Trucks

1 Answer

I cant locate my heater control valve, where is it???


The heater flow can be checked by feeling the hoses at the inlet and outlet to the heater core. If the heater has a control valve and it is open, both hoses should be warm. This indicates that coolant is flowing through the heater core. If the outlet hose is cold, there must be an obstruction in the heater core or control valve.
You can go to autozone.com and register for free for free online repair manual for your Ford

Oct 27, 2009 | 2000 Ford Expedition

1 Answer

My heater is not blowing hot air in my 2000 ford expedition.I put an new thermastat in, and it still does not get hot.


Check the heater control valve and see if it's operating properly. This should be on or close to the firewall behind the engine. There will be coolant hoses attached to it. There should be an arm or lever on the valve which is attached to a cable coming from inside the car. Moving the heater temperature control inside the car should cause this arm to move, thereby allowing hot coolant to enter the heater core. If this arm doesn't move freely, you don't get heat.

Oct 18, 2009 | 2000 Ford Expedition

1 Answer

2000 Ford Expedition heater core control valve


I have the same problem...leaking from the heater core
$700 to get repaired.well its not that hot were i live so oh well. good luke dude.

Sep 29, 2009 | Cars & Trucks

1 Answer

Heater not producing hot air


look between engine and heater core on heater hoses. It will be there on one hose or the other.

Dec 27, 2008 | 2000 Ford Expedition

1 Answer

99 expedition heater valve


yes to the first question
and yes it is the blend doors
recommend get another unit for the control or take that control out and see if one of the tubes is broken off the control unit

Dec 15, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...