I lost my harmonic balancer and all my drive belts are off

SOURCE: 2000 Honda Accord's Timing Belt and Water Pump

sounds like your timing belt is a little to tight and the vibration from the belt is the humming you here
loosen the belt but you may want to call the dealer for the spics on tightness of the belt . thx

SOURCE: harmonic balancer problems 96 honda accord

Hello, I dont mean to be the bearer of bad news but I have had three of these cars to do the same exact thing. The harmonic balance loosened up and it wore the end of the crankshaft and the balancer would not tighten up any more. The best option is to replace the crankshaft and balancer. There is not a quick fix fix this. Sorry. Please rate my answer. Thank you.

Dave C

• 1050 Answers
• Posted on Apr 01, 2009

SOURCE: i removed my timing belt from my 1992 honda accord

The balance shafts have marks on their sprockets that line up with indents on the block. For the one with the pin, just use a drill bit shaft that seems to fit the best and look for the marks. You only have two choices as you turn the balance shaft and expose the alignment hole. One of those spots will have fairly obvious marks that line up at the sprocket. The other one has a mark toward the front of the block. I'll see if I can dig up a photo and post it. The other tricky part is tensioning the belts, it's done in two steps while half the tensioner is clamped in place by a spare timing cover bolt. If you need help with this, let me know.
Please, please don't forget to remove the alignment pin or the bolt you used to clamp the tensioner!

SOURCE: Code P0420 - what does that mean? The car is an

Code P0420 probable cause, 1. Secondary HO2S (Sensor 2) or 2.Three Way Catalytic converter.

SOURCE: i need to know how to align timing belt and balancer shaft belt on 2.2 honda engine

I had the same problem with my 92 Accord I found an arrey of helpful videos on this I typed in, (92 accord timing belt.)