Question about 1999 Daewoo Nubira

1 Answer

Daewoo nubira timing marks

My timing belt snaped and there are no timing marks on cover

Posted by on

  • 1 more comment 
  • Merv57 Feb 02, 2009

    I have just replaced my sons 1.6 litre 1997 Daewoo Nubiras head. In the manual it says to align the cam gear marks with those on the valve cover. Unfortunately there are no markings on the valve cover. Can someone help with how to do this?

  • Merv57 May 11, 2010

    Do you mean pointing towards or away from each other. Thanks for your assistance.



    regards

  • Anonymous Mar 29, 2014

    not power

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 112 Answers

No timing marks on cover, timing marks are on sprokets they should be lined oposite each other.

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a diagram for timing for a daewoo


There is 2 possibilities. if it has the marks on the valve cover as in the first picture then use those to align the cam gear timing marks to. If no marks on the valve cover then point the cam gear timing marks at each other as per the pictures then align the crankshaft timing marks as pictured.

25112305-go2qkqusq2vchyq30ywu0a0h-5-0.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-1.jpg

25112305-go2qkqusq2vchyq30ywu0a0h-5-3.jpg

Sep 18, 2014 | 2000 Daewoo Nubira

1 Answer

What. Is. The. Position of. No 1piston. When. Setting. The. Timing. On. Daewoo. Nubira. Cdx. 2 l


after you remove the timing belt covers on the crankshaft gear have a noch face down to alaing tho the oil pump cover on the camshafts have two marks a the top of timing cover

Sep 09, 2014 | 2002 Daewoo Nubira

1 Answer

WHAT IS CORRECT TIMING MARKS FOR TIMING BELT INSTALLATION. 2000 NUBIRA 2.0 DOHC AND CRNKSHAFT MARKS. Thanks Joe


TIMING BELT
Removal
Disconnect negative battery cable. Disconnect intake air temperature sensor connector from intake air duct. Disconnect the air intake tube from the throttle body. Disconnect the breather tube from the valve cover. Remove resonator from throttle body. Remove air filter housing.
Raise and support the vehicle. Remove right front wheel. Remove right front splash shield from wheelwell. Remove serpentine accessory drive belt.
Remove crankshaft pulley bolts. It is NOT necessary to remove crankshaft sprocket center bolt. Remove crankshaft pulley. Lower vehicle.
Support engine assembly from above with Support Fixture (J-28467-B). Remove engine mount bracket from timing belt end of engine.Remove power steering hose clamp bolt, and position hose away from timing belt cover. Remove front timing belt cover. Using crankshaft center bolt, rotate crankshaft one full turn clockwise (as viewed from timing belt end of engine).
Align mark on crankshaft sprocket with notch at bottom of rear timing belt cover. See Fig. 4 . Align camshaft sprocket timing marks with notches on valve cover. See Fig. 5 .
CAUTION: Engine damage could result if camshaft sprockets are not properly aligned with notches on valve cover.
Loosen the automatic tensioner bolt. Use an Allen wrench to rotate tensioner and relieve tension on timing belt. Remove timing belt.
Fig. 4: Aligning Crankshaft Sprocket Timing Mark
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim_4.jpg
Fig. 5: Aligning Camshaft Sprocket Timing Marks
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim2_3.jpg
Installation
Ensure crankshaft and camshaft timing marks are still aligned. Install the timing belt. See Fig. 7 . Turn the timing belt tensioner counterclockwise to tension the timing belt. Turn tensioner until the pointer aligns with the notch on the rear timing belt cover. Tighten automatic tensioner bolt to specification. See TORQUE SPECIFICATIONS .
Using crankshaft center bolt, turn crankshaft clockwise (as viewed from timing belt end of engine) 2 full revolutions. Ensure timing belt tensioner pointer is still aligned with notch.
If timing belt tensioner is correctly aligned, install timing belt cover. See Fig. 3 . Install the engine mount bracket on the timing belt end of engine. Position power steering hose in place, and install clamp bolt. Install crankshaft pulley. Install serpentine accessory drive belt.
Install right front splash shield. Install right front wheel. Install air filter housing and resonator. Connect air intake temperature sensor connector. Connect negative battery cable.
Fig. 7: Identifying Timing Belt Routing
Courtesy of DAEWOO MOTOR AMERICA, INC.
266999_tim3_1.jpg
here

http://www.2carpros.com/questions/daewoo-leganza-2000-daewoo-leganza-timing-marks

Feb 17, 2011 | 2000 Daewoo Nubira

1 Answer

TIMING MARKS FOR TIMING BELT ON A 2001 DAEWOO NUBRIA


CLICK on the following LINK. It has the Timing Belt and Mark Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/daewoo/model/nubira/2001_daewoo_nubira_timing_belt_diagram_marks.htm

Mar 10, 2010 | 2001 Daewoo Nubira

1 Answer

Timing marks on 2000 daewoo nubira


there is a timing mark on the bottom pulley, but the plastic cover under the wheel arch needs to be moved and there are two dots one on each cam shaft on the side facing the wing but all the marks are for you to set up the statick timing after a cam belt change...hope this helps !!

Feb 02, 2010 | 2000 Daewoo Nubira

1 Answer

Timing mark diagram for a 2000 daewoo nubira cdx


here are the timming marks

7a3496b.jpg
e98992a.jpg
the other important thing is to
Rotate the automatic tensioner hex–key tab anti-clockwise until the adjust arm pointer of the timing belt automatic tensioner is aligned with the notch in the timing belt automatic tensioner bracket.
then turn engine over 2 turns and recheck marks and tensioner pointer

Nov 02, 2009 | 2000 Daewoo Nubira

2 Answers

Looking for cambelt timing marks/ positions please, Twin cam engine Thanks Kevin


these bend valves if belt breaks while running
Align the timing marks on the camshaft gears to the notches on the camshaft cover, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
Align the mark on the crankshaft gear with the
notch at the bottom of the rear timing belt cover.

May 12, 2009 | 1999 Daewoo Nubira

1 Answer

Timing marks for a daewoo nubira cdx


Here is a pic if the timing marks two small marks on the cam pulleys and one small cut away on the crank pulley .
3d2c66e.png

Dec 14, 2008 | 1999 Daewoo Nubira

2 Answers

Need a picture diagram of 1999 daewoo Leganza timing belt setting or mars?


need a picture diagram for timing marks nubira 2001 2.0L

Jul 20, 2008 | 2002 Daewoo Nubira

1 Answer

I have replaced broken timing belt on 1999 daewoo nubira and all timing marks line up but it will not idle properly and knocks


did the timing belt snapbefore you replaced it? if so you may have bent some valves. if not recheck timing marks and distributor position.

Jul 06, 2008 | 1999 Daewoo Nubira

Not finding what you are looking for?
1999 Daewoo Nubira Logo

Related Topics:

753 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...