Question about 1998 Ford F150 Regular Cab

2 Answers

Cant find the spark plugs

Need to know if this truck has sparkplugs and how to change them

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Get a spark plug socket, some extensions, and a wobble/flex joint, and prepare for scratched knuckles, lots of cussing, and about 5-6 hrs to do the job.
The plugs are located just below the valve covers and cylinder head. It's hard to see I iknow. Same thing on my 97.
Easiest way is to find your coil packs and follow the plug wires from there to the plugs.

Posted on Jan 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

The Spark Plugs are on Either side of the Block Around the Exhaust Manifold Area.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I drive a 95 toyota 4 runner.I would like to know the right way to check my sparkplug wires if working p roper.


You can fabricate a tester from a 6 inch long mongol pencil. Sharpen one end and drill a 1/8" hole in the middle. Now remove the sparkplug wire from each sparkplug and insert the pencil onto the sparkplug wire with the dsharpened end connected or touching the ground or any metal part of the engine. Start your engine and you should see sparks jumping on the drilled hole on the pencil which indicates that your spark plug wire is okay.

Nov 09, 2014 | Cars & Trucks

2 Answers

06 chrysler town and country shakes. why?


Possibly a vacuum leak, double ck the spark plugs installed for the proper plugs. Were they gapped correctly?

Apr 21, 2017 | 2006 Chrysler Town & Country

1 Answer

Not firing on 1 cynlinder


change faulty sparkplug or ht lead,check lead by holding sparkplug end near to engine nearly touching,have someone turn engine over whils checking for spark jumping,if spark present then not lead,change spark plug,if sparkplug ok then check pressure in cylinder, poss piston damage

Jan 02, 2012 | Cars & Trucks

2 Answers

Do i need a head gasket after changing spark plugs


No unless there is a problem other than changing you spark plugs.

Jan 02, 2011 | 2000 Kia Sportage

1 Answer

I cant find spark plugs


I am writing you the method on how to change sparkplugs, you may now have an idea where spark plug is loacted.

The Ford Expedition uses eight spark plugs to accommodateits eight-cylinder engine. Replacing the spark plugs every 75,000 miles is animportant part of overall vehicle maintenance. 1. Disconnectthe negative (black) battery cable from the battery terminal. Remove thewiring harnesses from the spark plug coils. There will be four on each side ofthe engine block, which you can remove by simply pulling them out of the sparkplug coils. 2. Unscrew the 7mm bolt from each of the spark plug coils usinga socket wrench and 7mm socket. 3. Pull each spark plug coil out of the engine block. Pull themout slowly, being careful not to damage or tear the coils. 4. Use a socket wrench and spark plug socket to unscrew eachspark plug from the engine block. Once you remove these, discard them. 5. Place the new spark plugs into the engine block and tightenthem using the socket wrench and spark plug socket. 6. Slide the spark plug coils back into the engine block. 7. Bolt the spark plug coils back into place using a socketwrench and 7mm socket. 8. Reattachthe wiring harnesses to the spark plug coils. 9 . Connect the negative battery cable to the negative batteryterminal.

Nov 25, 2010 | 2003 Ford Expedition

1 Answer

How do i change spark plugs in 1992 buick le sabre


To change the plugs, do one at a time so not to mix up the sparkplug wires, remove plug wire from a plug, use sparkplug socket to remove the sparkplug make sure to gap new plugs, ask parts store for the gap setting they will give it to you when plugs are bought, the plug gapper is about $2.00. and that about it, the rear plugs are a little harder to get to but the same way to remove, some buicks came with metal heat sheild over the sparkplug boot in the rear cylinders make sure to reuse, you will know if you have them they will slide right off old boot.

Aug 20, 2010 | 1992 Buick LeSabre

3 Answers

I am trying to replace my honda fit spark plugs and I cant even find them. Where are they on the2007 honda fit?


Maybe I can help you. I've found this video that shows how to replace ignition coils on a Honda Fit/Jazz. You'll see where the spark plugs are after removing the ignition coils. I hope it helps!

https://youtu.be/aWvAnCmjv28

. How to Remove Refit Ignition Coils Honda Fit Jazz

Oct 18, 2009 | 2007 Honda Fit Sport Hatchback

1 Answer

Need location of spark plugs an need to know how to change them


There should be a cover over the engine, take the cover off and you will see them on top of the engine. CAUSE!!!! Take one sparkplug out at a time, so you don't mixed up the leads.



Jul 19, 2009 | 2000 Kia Sephia

2 Answers

Cant find sparkplugs


The spark plugs are under the aluminum engine cover plate on the top of the engine. ( The one that has the raised ribs and has the 2.4 on it) You need to remove the 4 bolts that hold the plate on the engine and then you will see the spark plugs in the center of the head in between the cam towers. Once you get the plate off, you can't miss them.

May 31, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Sparkplugs


Pull the boots off and use an extension with your socket and "feel" for the socket to go over the spark plug, When you know have a good fit on the plug, use your ratchet and remove each one. Install the plug into the plug socket and again "feel" for the plug hole when your installing them.

Jun 12, 2008 | 1991 Toyota Camry

Not finding what you are looking for?
1998 Ford F150 Regular Cab Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...