- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Needs to have at least 3o lbs of fuel pressure,may need to rent a gauge from your local parts house. Plus make sure all the ground wires are attached (bell housing bolt is where the ECM ground is,I think)
Water pump is on the left side of the timing belt in the cover and spins on an O-ring to adjust the belt. Their is a coolant pipe to the the thermostat housing behind the timing covers backing plate also. Be sure to replace the timing belt with the tensioner/ oil seals along with the water pump. Remove the timing covers back plate and you will find two bolt to the pipe as mentioned. It has a large o-ring behind it. Have fun with this one. From: Ronnie Wrench