Question about 1995 Chevrolet Beretta

2 Answers

Heater hoses on 1995 beretta

How do I know witch hose goes where from the motor to the heater core

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

There should be a long one and a short one,the longer one goes to where the thermostat housing is and th shorter one hooks up close to the back of the motor.

Posted on Jan 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

They are two different sizes one larger and one just a little smaller but actually it doesn't make any difference.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Witch way do you hook up heater core hoses. Dont no witch way they go


On my Chevy van the top connection on the heater core connects to the radiator and the bottom connection on the heater core connects to the engine.

Feb 13, 2017 | Cars & Trucks

1 Answer

My heater core was not connected and my hoses to it was join and just ac comes on but today I connected it to the heater core and heat comes on great but no ac but hot air when I turn the ac on, what is...


It looks like the mixed door have a problem like vacuum or electrical motor depends witch system you have
remove glove compartment. you will see the vacuum pack or electrical motor with many wires.

Oct 04, 2013 | 1995 Cadillac Seville

1 Answer

How do i hook back up my heater hose on my 95 beretta


Hello! I'm in total agreement with Steve...Guru...saailer

Nov 21, 2011 | 1995 Chevrolet Beretta

1 Answer

Water leak between motor and back fire wall


Sounds like you have a leaking heater core or else the hose that goes to the heater core. Do your windows fog up when you run the defrost? If so then the heater core is leaking and will need to be replaced. If not then maybe you have lucked out and the hose just needs to be replaced.

Good Luck

Feb 18, 2011 | 1995 Lincoln Town Car

1 Answer

What is the name of the hose that goes from the heater core to the back of the motor on a 1995 chevy V6 2 wheel drive standard transmission


That is just 5/8" and 3/4" Heater Hose!!
You buy the length you need off a roll, at the auto parts store

Nov 08, 2010 | 1995 Chevrolet K1500

1 Answer

It does'nt heat ,I flushed heatercore,chaged thermostat,bled the radiator, car does'nt overheat. hoses to heatercore by firewall are cold other hoses are hot.


Need to check the valve that opens and closes the heater hoses and allows the water to travel to/thru the heater core. 1992 Chevrolet Beretta 2.2L SFI OHV 4cyl The Temperature Switch is located: Under hood, center, upper engine area, next to water outlet, driver side of block, mounted below coolant temperature sensor

Dec 07, 2009 | 1992 Chevrolet Beretta

1 Answer

Coolant leak on my chevy beretta from the ac unit


I would say that your heater core or one of the heater core hoses has started to leak. Check the hose clamps to make sure that they are tight. Fill the coolant system and run the car. Check to see where the leak is, you may need to put the car on ramps so that you can see the leak better.

May 20, 2009 | 1995 Chevrolet Beretta

1 Answer

I need to know where the hoses go from the heater core?


Have had the same problem with a Corsica.The reason they bypassed the heater core is that it had a hole in it.Reccomend filling with water prior to hooking up hoses.

Feb 04, 2009 | 1991 Chevrolet Beretta

1 Answer

1995 camaro hvac motor location


  1. Drain the engine coolant into a suitable container.
  2. Open the instrument panel glove compartment. Push in on the sides of the compartment to release it, allowing access to the heater core.
The heater core can be damaged if too much force is applied to the heater core pipes during hose removal.
  1. Remove the heater module screws and remove the heater module assembly cover. For vehicles equipped with A/C, remove the air conditioning evaporator temperature sensor assembly from the heater and A/C cover.
  2. Remove the heater core screw and clamp.
  3. Remove the hose pipe clamp screw and the hose pipe clamp. Clamp off the heater hoses.
0900c152800b8721.jpgFig. 1: Heater hose and pipe routing-3.4L engine 0900c152800b8722.jpgFig. 2: Heater hose and pipe routing-3.8L engine 0900c152800b8723.jpgFig. 3: Heater hose and pipe routing-5.7L engine
  1. Disconnect the heater hoses from the pipes.
  2. Remove the heater core by carefully pulling it towards you.
0900c152800b8724.jpgFig. 4: Exploded view of the heater core removed from the heater module assemblyTo install:
  1. Install the heater core and attach the heater hose assembly to the heater hose pipes. Note the following:
    1. Lubricate the heater core pipes with petroleum jelly for ease of installation and to assure a good seal.
    2. Be sure the seals around the heater pipes remain in place when installing.
    3. To verify that the seal is installed correctly, observe the seal from inside the engine compartment. If the seal has leaks, apply a sealer between the heater core pipes and the evaporator housing.
  2. Install the hose pipe clamp and the bolt/screw. Unclamp the heater hoses. Tighten the hose pipe clamp bolt/screw to 16 inch lbs. (1.8 Nm).
  3. Install the heater core clamp and screw. Tighten the screw to 16 inch lbs. (1.8 Nm).
  4. Install the heater module assembly cover and secure with the retaining screws. Tighten the screws to 18 inch lbs. (2 Nm).
  5. Connect the negative battery cable.
  6. Refill the cooling system. Operate the engine and check for leaks, add coolant if necessary.
  7. Install the instrument panel glove compartment.

Feb 03, 2009 | 1995 Chevrolet Camaro

1 Answer

Heater core broken


All of it don't try this at home unless you are experienced.
  1. Disable the Supplemental Inflatable Restraint (SIR) system, refer to Disabling the Supplemental Inflatable Restraint (SIR) System. See: Body and Frame\Interior Moulding / Trim\Air Bag(s) Arming and Disarming\Service and Repair
  2. Negative battery cable.
  3. Drain cooling system.
  4. Raise vehicle.
  5. Drain tube from heater case.
  6. Heater hoses from heater core.
  7. Lower vehicle.
  8. Right and left sound insulators.
  9. Steering column opening filler.
  10. Floor air outlet duct.
  11. Heater core cover.
  12. Heater core mounting clamps and remove heater core.

Nov 19, 2008 | 1995 Chevrolet Beretta

Not finding what you are looking for?
1995 Chevrolet Beretta Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...