Question about 2002 Dodge Dakota Club Cab

1 Answer

Heater only works on high

I have aa 2001 chrysler concord and fan only blows on high. I bought the resistor block. my question is where is it located and how hard is it to get to.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

Resistor block is located in the ducting somewhere close to the blower motor. They keep it there so that it alwys has air blowing across it, to keep from buring out too fast. Though as you may well know Chrysler never makes things easy and you may want to leave this one for a pro.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater blower is on high all the time


Sounds like you have a shorted blower resistor.usyally located near the blower fan

Jul 24, 2014 | 1999 Chrysler Concorde

1 Answer

Heater fan only blows on high seaberng 2002


Check the blower resistor. This is the piece that the blower connector plugs into. Chances are that is your problem.

Jun 24, 2011 | 2001 Chrysler Sebring

1 Answer

My ac/heater fan stops blowing then it blows sometimes? The air is still cold just not blowing out. when it does blow it is cold.


replace fan speed resistor block if this only happens on lower fan settings if it happens on high fan speed also, replace blower fan

Jan 20, 2011 | 2001 Isuzu Trooper

1 Answer

2001 Chrysler Town & Country air conditioner/heater blows on high only. We have replaced the front blower relay and it still doesn't work. The back blower is the same.


THE REASON THE BLOWER ONLY WORKA ON HIGH IS BECAUSE OF SOMETHING CALLED THE BLOWER MOTOR RESISTOR. THIS IS A BLOCK WITH ABOUT THREE DIFFERENT RESISTORS ON IT WHICH CONTROL THE AMOUNT OF VOLTAGE THAT REACHES THE BLOWER MOTOR THUS GIVING YOU YOUR DIFFERENT SPEEDS.
THIS BLOCK IS USUALLY LOACATED BEHIND THE GLOVE BOX AND IS BOLTED TO THE HEATER HOUSING.

Jun 09, 2010 | 2001 Chrysler Town & Country

1 Answer

2001 Mazda Tribute (3.0 L) Heater motor functions on high only


Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

Jan 19, 2010 | 2001 Mazda Tribute

1 Answer

Blower motor stuck on high! 2001 town &country 3.8 lxi. unpluged blower control module and blower motor still stuck on high. any ideas? thanks ED


your blower resister is bad and you need to replace it.......heres how,The glove box can be lowered all the way out of the way just by pulling in the sides so the rubber stoppers come out toward you. The sides bend easily to allow that.

The glove box being out reveals the resistor in the heating duct right in front of you. Just remove the two sets of wires and two bolts (10mm socket, I think) and the resistor pack slides right out. Then bolt in the new one an plug the wires back in (they only fit in one way). Fold the glove box back up and press the stops in to get them back in place and you are done.

The resistor pack only cost $12 and change at my dealer. It is part number 1-04885583AB which was a replacement for the same number with AA at the end, so I’m guessing they had a lot of trouble with the AAs and so made a better AB.

Last Winter my heater blower fan worked only on High. I changed the front heater/AC blower resistor pack and was surprised at how easy it is, but I had to figure it out for myself since my Dealer's parts guy was no help as to where the part lived and my Haynes manual was just plain wrong. This was on a 2001 T+C. I'd be very surprised if the 2001 Caravan was any different. Don't know what other year vans would be the same. I do know some earlier generations had this resistor under the hood and Haynes had is with the blower sort of behind the instrument cluster.

Jan 14, 2010 | 2001 Chrysler Town & Country

2 Answers

Heater blower not working


It sounds like your cabin air filter has stopped up common problem on these cars. You have to remove the glovebox to get to it. If this filter stops up, your fan will be running on high but hardly anything will come out of the vents.

May 31, 2009 | 2001 BMW 325

2 Answers

Ac fan won't turn off


In my 2001 Town and Country without automatic temperature control, my heater/AC blower suddenly worked only when set on high. Usually, that problem is your blower resistor pack.

I had to search for the one in my van since the parts man wasn’t sure where it was except that he thought it was in the dash somewhere. (In some other vans it was under the hood.) My Haynes manual didn’t have anything on it except a picture showing it with the blower. I found it directly behind the glove compartment. Very easy to get to once you know where it is.

The glove box can be lowered all the way out of the way just by pulling in the sides so the rubber stoppers come out toward you. The sides bend easily to allow that.

The glove box being out reveals the resistor in the heating duct right in front of you. Just remove the two sets of wires and two bolts (10mm socket, I think) and the resistor pack slides right out. Then bolt in the new one an plug the wires back in (they only fit in one way). Fold the glove box back up and press the stops in to get them back in place and you are done.

The resistor pack only cost $12 and change at my dealer. It is part number 1-04885583AB which was a replacement for the same number with AA at the end, so I’m guessing they had a lot of trouble with the AAs and so made a better AB.

Last Winter my heater blower fan worked only on High. I changed the front heater/AC blower resistor pack and was surprised at how easy it is, but I had to figure it out for myself since my Dealer's parts guy was no help as to where the part lived and my Haynes manual was just plain wrong. This was on a 2001 T+C. I'd be very surprised if the 2001 Caravan was any different. Don't know what other year vans would be the same. I do know some earlier generations had this resistor under the hood and Haynes had is with the blower sort of behind the instrument cluster.

Dec 13, 2008 | 2002 Chrysler Town & Country

7 Answers

Heater Control Switch Only Works on High


Your problem is probably a part called the heater resistor block or board. When this part burns out you will only have high speed on the fan. On my 1999 voyager it is located on the firewall and it snaps in a hole in the firewall. This is under the hood behind the alternator.
Mine had a multi pin black plug plugged into it. Unplug the plug and
you should be able to pull the block out insert new block and plug plug back in and it should come to life.

Jun 05, 2008 | 2001 Chrysler Voyager

Not finding what you are looking for?
2002 Dodge Dakota Club Cab Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...