Question about 1995 Mitsubishi Eclipse

1 Answer

Pi4oo MSP trouble code mitsu eclipse 1995

Check engine light came on was able to clear all the comp codes but have problem understanding this 1400 manufacturer specific powertrain trouble code. Anyone have any help for me? thanks

Posted by on

  • 3 more comments 
  • racegirlrand Jan 16, 2009

    heres how it went. The check engine light came on on my 1995 mitsu eclipse. Friend was able to clear all the comp codes and the check engine light went off. Drove vehicle and put the code scanner back onto the car and it now read exactly like this P1400 Manufacturer Specific Powertrain Trouble Code. The engine light NEVER came back on only the scanner had this reading. Hope that was better to assist you in assisting me. Thanks for the time.

    RaceGirlRandi

  • Stephen Bisson II
    Stephen Bisson II May 11, 2010

    Hello, is this a turbo or non turbo?

  • Rick Byrd
    Rick Byrd May 11, 2010

    P1400 is a Mitz Specific Code .Manifold Differential Pressure Sensor Circuit Malfunction-20 , there is a testing procedure but will require a break out test kit , or you might price out a MDP sensor . if its cheap enough , you might concider throwing 1 at it , i don't like throwing parts at cars .but if you don't have the proper testing equipment , gotta do what you gotta do... do you have the 2.0L turbo ? this code pertains to the 2.0L turbo engine .

    J5


  • yadayada
    yadayada May 11, 2010

    that is not a valid code, have the test run again.

  • yadayada
    yadayada May 11, 2010

    there is no Pi4oo trouble code, please correct the info.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The error is actually P1400 Manufacture Controlled Auxillary Emissions Controls. I'm having that issue with my 2001 Mitsubishi Eclipse right now. Not to mention the bad paint job.

Posted on Sep 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Ford F150 codes 111,132 what they mean


P1131 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 1

P1132 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Rich - Bank No. 1

http://www.obd-codes.com/trouble_codes/ford/

Understanding Trouble Codes 111, 211, 172 Hey everyone,

recently pulled some trouble codes from my ECU, the KOEO code gives me 111, which the book says is a system pass, so I am assuming thats not a bad thing. I further went on to get the stored codes which are as follows (I get the same codes while doing a running test as well).


Understanding Trouble Codes 111 211 172 Ford F150 Forum Community of Ford...

Aug 01, 2016 | 1995 Ford F150 Styleside Regular Cab

2 Answers

My malfunction indicator light of my Toyota camry 2000 is blinking and the car cannot accelerate well. my mechanic seems not to understand the problem. what ca I do?


When you said "...indicator light blinking," I assume you mean "check engine" light is on. Procure a check engine code reader and download the trouble code. When you isolate which component the trouble code is talking about, ascertain its not a faulty sensor. Read the code reader instruction and look up "clear trouble code" to turn off the "check engine" light. Replace the sensor first and see if it stops sending the trouble code. If the sensor is still sending a trouble code (check engine lights up again), then replace the component which the sensor is monitoring.
e8d51a8c-e69c-46a9-a698-59a9bf1939a6.jpg

Nov 29, 2013 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

What is troulbe code 12 And 55 on 1995 misubishi eclipse


ok code 12 means that you disconect battery recently, maybe you were trying to clear trouble code by doing that, in worst case just replace the battery not a big deal

Code 55 means "no Trouble codes found" code 55 means that thats the end of self testing codes, there is no mode code. just ignore code 55.

im pretty sure you were doing a selft testing dtc bye turning switch on and off.

Nov 08, 2011 | 1995 Mitsubishi Eclipse

2 Answers

My 95 eclipse is throwing codes 12, 31, 43, and 55 what do these codes mean?


12-cam shaft position Timing over retarded
31- HO2S heater Control Circuit Low (Needs a new O2 Sensor is what this is telling you)
43- HO2S Heater Control Circuit Low (Bank 1 Sensor 3)
55- HO2S Heater Resistance (Bank 1, Sensor 3)
All of those assume they are supposed to be preceded by a P00

If you are getting ODBI codes these are teh definitions you are looking for:
Code 12 Air flow sensor fault
Code 31 Knock sensor fault
Code 43 EGR fault
Code 55 AV valve position sensor

These may make more sense with that year model.

Jul 22, 2011 | 1995 Mitsubishi Eclipse

2 Answers

How do I get the trouble shoot code to read out on my 95 mitsu mighty max through the check engine light?


put car in nuetral, apply e-brake, turn key on and off three times and it should start to flash the codes

Mar 10, 2011 | 1995 Mitsubishi Mighty Max

1 Answer

1995 eclipse engine light


Go to your local auto parts superstore and ask them to hook up the OBD scanner to read the fault codes. Or your mechanic. Hope this helps.

Apr 03, 2010 | 1995 Mitsubishi Eclipse

3 Answers

Where do I connect a code reader to a 95 eclipse gst


Look under the dash on the drivers side. There should be a port. Some have a plastic or rubber cover on them to keep them clean. It will be the same size as the end of the plug on the reader.

Feb 25, 2010 | 1995 Mitsubishi Eclipse

1 Answer

I have a 1992 mitsu eclipse 2.0l 16 valve, broken timing belt


it depends on car -some r protected against this because the piston is shaped so theres no contact with open valve-u can ask manufacturer. onother way is a compression chec-cylinders with bent valves hav no comp. and of course if u put a new belt on with the timing rite and it dozint start

Aug 23, 2009 | 1992 Mitsubishi Eclipse

2 Answers

Code p0412 , what is the fix? 1995 mitsubishi eclipse with a dodge avenger 2.0 engine.


P0412 Pulsed secondary air injection solenoid circuit, with seeing it and what it is doing i would guess replace the secondary air injection solenoid control valve.

Jun 05, 2009 | 1995 Mitsubishi Eclipse

1 Answer

Have trouble code po135 on a mitsubishi eclipse,


Oxygen sensor. try this link & scroll down until you find your codes.

http://www.troublecodes.net/mitsu/

Jan 31, 2009 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
1995 Mitsubishi Eclipse Logo

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63586 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...