Question about 1992 Ford Explorer

1 Answer

My hoover vacuum cleaner shorts out

The vacuum motor will come on sometimes, but then turns off only the brushes spin. I still don't know what is wrong?

Posted by on

  • yadayada
    yadayada May 11, 2010

    u do know this is a car site????????

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Helo! ai neat sam pictures with transmision!

Posted on Feb 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hoover air steerable


Is this a car, truck, or Vacuum cleaner?

Jul 14, 2016 | Cars & Trucks

1 Answer

Overheating hoover


Clean out the vacuum cleaner, removing whatever is stuck so that th eelectric motor can cool itself.

Sep 07, 2014 | Cars & Trucks

1 Answer

Where does the long (30 inch) vacuum hose from the Air cleaner hook on?


You should be able to hear a sucking sound from where the line is supposed to go. Probably on the base of the carby. You can spray a little aero start around where you think the leak might be ie: carby. the aero start will be sucked into the open vacume port & the revs of the motor will change. Sorry I don't know exactly where it goes.

Jun 29, 2012 | 1987 Ford Econoline

1 Answer

MAKES A WHISTLING NOISE ON ACCELERATION , LACKS POWER AND DIES SOMETIMES ON START


check for a bad vacuum line,, one thats either come off, or cracked allowing vacuum to escape,, start the motor, and spray short bursts of carb cleaner around the intake and vacuum hoses,, if the rpm's speed up,, thats where the vacuum leak is going to be,

Sep 09, 2011 | Volvo S40 Cars & Trucks

1 Answer

99 dodge 1500 p-up-318 block starts fne, warms up and starts to hear air suction sound from under the hood, motor kills and then wont stay started after that...


check all the vacuum lines, and the PCV valve, get a can of carb cleaner, and while the motor is running, spray short bursts of the carb cleaner all around where vacuum lines are located, if the motor rev's up thats where your leak is going to be

Aug 12, 2011 | 1983 Dodge Pickup

2 Answers

My 1991 chevy silverado wipers work sometimes and sometimes they don't. i can't figure it out. how do i fix the problem so they always work?


Sounds as though you have a short lift hood and and giggle wires going to wiper mot-er while wiper switch is on if it starts that means you have a short. If not replace wiper motor.

Sep 17, 2010 | 1990 Chevrolet C1500

1 Answer

Blower motor worked sporadically, then not at all


The fan motor will need to be replaced. You can access it at the firewall. There will be 3 screws holding it on. The brushes inside the motor are shot and will need to be replaced. You can also hit up a junk yard.
If the brushes are shorted out, then the motor will short out causing you to blow fuse.

Jul 19, 2009 | 1997 Chrysler LHS

1 Answer

When i shift in 4x4 , the light goes on but i don`t have front wheel spin?


You would have to remove the vacuum lines off the motor and see if you got vacuum.

Oct 04, 2008 | 1991 Jeep Wrangler

Not finding what you are looking for?
1992 Ford Explorer Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...