Question about 2006 Chevrolet Impala

1 Answer

HOW TO REPLACE TAIL LIGHT ON 2006 CHEVY IMPALA?

How do you replace the tail light on the 2006 Chevrolet Impala? Do you just open the trunk, loosen the screws behind the tail light assembly, and then just pop-out the tail light assembly?

I loosened the screws but it didn't pop-out. Maybe the assembly is supposed to stay in place but the back can be opened from the trunk. I don't know. Please help.

Posted by on

  • 2 more comments 
  • Anonymous Mar 03, 2009

    The assy has to come out but it won' budge, The in side is metal and if there are more than 3 screws ???

  • Anonymous Mar 13, 2014

    2006 impala tail light

  • Anonymous Mar 29, 2014

    ENGINE LIGHT COMES ON

  • Anonymous Mar 29, 2014

    trunk will not stay open

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Each bulb should be in a socket that is accessable from the trunk... it take a half turn or so to remove it.....

Robert

Posted on Jan 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace brake light bulb audi a4 1.8t 2002


Start by opening the trunk lid. On the sides of the trunk, just beside where the trunk lid sits when closed there is a circle cap on either side. Remove the cap it is the same material as the trunk side trim (fuzzy carpet) then there will be a screw set into the hole that you just uncovered. You can use either a philips screw driver or an 8mm socket and remove the screw/bolt. you may need to reach in with a set of needle nose pliers to remove the screw after it is loosened all the way. Once the screw is removed grab the tail lamp assembly from the inside and twist the tail lamp out of the holding pins located on the side edge of the tail lamp. The whole light will come off of the body in your hands. Once the tail lamp assembly is out there is an access panel on the back side where all the bulbs are installed. Depress the two holding tabs on the sides and carefully remove the bulb holder. Then replace any blown bulbs and reinstall.

Jan 17, 2014 | 2006 Chrysler PT Cruiser

1 Answer

My tail light went out in my 04 kia rio and i cant get to the bulb to change it


In order to change the bulb you must dismantle the tail-light assembly from the vehicle. In common cases, this is an easy procedure. First, open the trunk. Second, look behind the tail-light and look for any screws that may be in the bottom of the trunk behind the tail-light assembly (some carpeting may hide screws). Third, unscrew any screws, once all visible screws are off, and the assembly won't easily come off, there may be push in connectors, if so give the assembly a hard tug back and the assembly should pop off. Fourth, you will see the stock bulb connector wiring with the bulbs, simply turn the bad bulb by the fitting 1/4 counter clockwise and it should come out of the assembly. Fifth, simply pull out the bulb from the adapter, and push in the new one, the install procedure is simply reverse in steps. Good Luck.

Jun 23, 2011 | 2004 Kia Rio

1 Answer

HOW DO I GET AT TAILLIGHT BULB IN 2008 CHEVY IMPALA TO REPLACE IT?


Ok to remove tail lamp assembly open the trunk and there are plastic nuts that hold the cargo remove that nut and pull back the hard fabric on the sides and there should be 3 to 4 plastic nuts, remove all and remove tail lamp and replace your bulb. good luck!

May 23, 2011 | 2008 Chevrolet Impala

1 Answer

I am trying to replace a bulb in the rear tail light of my Chevrolet Lacetti. I have opened the tailgate and removed the two screws which hold in the light assembly but still cannot get the assembly out. I...


Try to turn the two plastic things counterclockwise to loosen them...on many GM tail assemblies these are actually hold-down screws...to re-install insert onto bolt and turn clockwise to securely tighten...you probably did not have to remove the two other screws...Hope this helps.

Mar 28, 2011 | 2005 Chevrolet Aveo

1 Answer

How do i change the tail light bulb in my 2006 Chevy Impala SS


Hi, there are instructions in the owner's manual beginning on page 5-50. If you don't have a manual, you can get a free download here: http://www.extendedgmwarranty.com/owners-manual/chevrolet/2006-Chevrolet-Impala.pdf

If you need further help, please reply; and thanks for using FixYa.

Jan 16, 2011 | 2006 Chevrolet Impala

1 Answer

2006 chevy impala rear tail light...


there is a connector that plugs into the light that should be looked at. is there any water leaks anywhere. there were problems with water leaks on some malibu models around the tail lights. pell open the inside covers and get to the tail light to inspect for this. also check those bulbs just in case they did go bad. any condensation in the light? not sure if the Impala has a single fuse for both tail light or one for each but you should check fuse box under dash and under the hood. good luck

May 14, 2010 | 2006 Chevrolet Impala

1 Answer

How do i replace a tail light?


Tail light should be in the trunk, open up trunk, find panel that should come off, go to Auto Zone get a new one.

Apr 04, 2010 | 2008 Chevrolet Impala

1 Answer

I have a 1993 Chevy Lumina and the back taillight was hit and broken, how do I replace the tail light assembly?


inside the trunk behind the tail light,pull the carpet down and remove the screws,nuts,bolts or the finger nuts and the light will pull right out

Jan 14, 2010 | 1993 Chevrolet Lumina

Not finding what you are looking for?
2006 Chevrolet Impala Logo

951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...