Question about 2001 Ford Explorer

1 Answer

Need new gear box

For a ford explorer limited edition 2001 automatic. how much will it cost me for a replacement.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 47 Answers

It all depends on what you want for a transmission. If you can find a good used one at a salvage yard it will probably run you around $700 to $900, figure on about $400 to have it installed with new fluid and filter. What I recommend to my customers is a Jasper transmission, they come with a 3 yr/100,000 mile warranty. A used one at a salvage yard if you are lucky will have a 90 day warranty. The Jasper will usually run about $3000 installed. If it's a vehicle you plan on keeping and driving for a while I'd go the Jasper route, if you plan on selling it as soon as you get it going go the used route if you can find a good low mileage one. Good luck

Posted on Jan 17, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Color code for the wires that come off of my transfer case and connect to my transfer case motor for a 2000 ford explorer 4.0 liter v-6

Search Results
    images for 2000 ford explorer 4.0 liter v-6 wiring image

    Wiring diagram ford explorer limited 2000 - Ford Explorer and ... > ... > Stock 1995 - 2001 Explorers

    Sep 5, 2012 - 8 posts - ‎6 authors
    Wiring diagram ford explorer limited 2000 Stock 1995 - 2001 Explorers. ... 2001 Explorer XLT 4.0L SOHC V6 auto 2WD (RIP 5/13)

Dec 30, 2015 | Ford Cars & Trucks

2 Answers

I have a 1993 Ford Explorer that goes into high idle when I put in gear. It does this when the engine is hot or cold.

On some cars there's a speed sensor on the clutch or transmission. That might cause an idle problem.

Mar 24, 2014 | 1993 Ford Explorer Limited

1 Answer

Where is the automatic transmision filler or adding the fluid on 2006 ford explorer

Hi there.
You should take it back to either FORDS or any auto matic gear/box people and have it changed and refilled with new autotrans fluid

Jan 12, 2014 | 2006 Ford Explorer Sport Trac

1 Answer

I have a 1995 ford explorer limited 4x4 w a 4.0,I had all the gears replaced in the transmission including the torq converter,the port is original,none of the electrical issues were resolved,overdrive is...

Hi Shane,

On the long run it will be more cost effective to replace the box. I suggest to take the box to a gearbox specialist and swap it out with a rebuild with an garentee. This is cheaper than fixing the problem on the current box and it has a warentee.

Aug 06, 2013 | 1995 Ford Explorer

1 Answer

I Lost the only Key I had to my old truck. how do i get a new one? .Or can i just "rig it" without an actual Key to start it?? Its an 1993 limited Edition Ford Explorer

call a reputable locksmith, they will be able to send someone to you that can make a key from scratch. usually cost about a hundred dollar, but better than breaking the lock on the steering column.

Apr 10, 2011 | 1993 Ford Explorer Limited

1 Answer

I have a 95 ford explorer limited edition. I blew a head gasket and just put in a rebuilt engine. Now my automatic transmission is not working. I can put it in all gears but it does nothing just stays in...

Two things come to mind. Double check to make sure the shifter linkage is hooked up properly and double check to make sure the torque converter bolts were put back in. Hope this helps.

Oct 10, 2010 | Ford Explorer Cars & Trucks

1 Answer

Water leking behind motor

You'll need to knock out the old one. They make a freeze plug installation tool, or you can use a socket to pound in the new one. Also, they have expandable rubber freeze plugs that don't have to be pounded in.

May 07, 2010 | 1994 Ford Explorer Limited

1 Answer


take it to the dealer and have them reprogram the pcm to latest calibration.

Jan 22, 2009 | 2001 Ford Explorer Sport

1 Answer

Why won't the 4x4 kick in on the 1994 ford explorer

I have a 1992 4x4 eddiebauer edition and unless I was doing 25 miles an hour mine would not kick in either. For low range I had to put it in 1 on the gear shifter

Jan 08, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
2001 Ford Explorer Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5623 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides