Check the wiring coming through the tail gate, the wiring breaks and grounds out , check wiring, some wiring you can see if you open the door and look for the rubber boot containing wiring, check all wires, you will find bad broken wires, caution have checked could cause lights to go out and not work or cause a electrical fire.
SOURCE: 2000 isuzu rodeo brake problems
your master cylinder is gone. when stopped apply pedal and hold let up slightly then reapply if pedal sinks to floor master is bad.
SOURCE: Isuzu Rodeo abs light
I had it repaired: one of my sensors needed to be replaced. No more light!
SOURCE: brake light bulb
hi cjryan 9876 when you look on the outside of the lens there are 2 philips head screws & if open your tail gate there are another 2 philips head screws in there as well one of which is located through the locking tab for the tailgate once you undo these the tail light should fall out & then to get the tail light out of the socket give it a quarter turn anti clock wise
SOURCE: I am looking for a wiring diagram for a 2004 Isuzu
there could be a problem with the linkage itself, when it does not come out of park there is a reason, when you force it, that is when you create bad problems for yourself. it could be something as simple as the brake lamp switch located directly on the brake pedal arm.
SOURCE: 2004 Isuzu Rodeo 3.5ltr 4X4 hesitation/misfire acceleration
The upper intake gaskets may be leaking. They are made of plastic and metal and will leak air. Do not remove the cover on very top of manifold when changing.
139 views
Usually answered in minutes!
×