Question about 1996 Jeep Grand Cherokee

1 Answer

LPG not working

Car was running great then one day 10m from house it stalled and now cannot start motor at all.what do i check old Holden HQ red motor.Is there a fuse ?? help me please.

Posted by on

  • hqute Jan 28, 2009

    On the wheel arch normaly passenger side is a black box with 4 wires connected to it. First make sure it is earthed well with black wire,then check the live wire should b red is working if not go to a auto one shop and take the old one with you so they can find a match.Also the black pipe from gas cylinder that connects 2 your carbi. disconnect from carbi get someone to turn key over and see if gas is flowing dont hold key to long just enough to check.

  • HomeTime May 11, 2010

    Does the car turn over and try to start? Test to see if you here the fuel pump. Test for spark.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had this problem recently -- dealer told me it was the fuel pump (without looking -- it wasn't); then I had the distributor replaced (definitely needed it, but it wasn't that either); ultimately turned out to be the crank position sensor (solved the problem).

Recommendation: go to a reputable mom-and-pop shop, or if you'
re able, do the repair yourself.

Best of luck to you.

Posted on Jan 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i fix my 2003 holden barina `eps warning light from coming on


It'll pay to have the crank sensor checked. They're known for heating up and stalling the car when they're no longer any good. Usually once it has cooled down the car will start but as soon as the sensor gets hot it'll stall again

Aug 28, 2016 | Holden Cars & Trucks

1 Answer

Eng no H238265 RED MOTOR WANT TO NO WHAT size E.g . 149, 179 as don't say on side block holden block


the holden red motor covered a range of capacities from 149,161,173,179,186,202
one site says the number of welsh plugs in the side of the block next to the starter is a method 3 plugs = 149
5 plus (3big,2small=179,186,161 etc
149 blocks have no casting identification where as 179 have HP cast in the block
from what I can find the h indicates 149 as 179 numbers start with m
if the engine number is m--it is 179 high comp built prior to hq cars
for interesting reading go google and type in --engine numbers for holden 149 engine -- and there are many pages of information for reading

Jul 19, 2016 | Holden Cars & Trucks

1 Answer

Hi the other day i started the toyota up after finishing work it backfired now it wont run on lpg. It runs on petrol but wont on LPG any ideas would be great.


the fact that it runs on fuel means that the electronics of the vehicle are all operational. The problem is the fuel selection process for he LPG. The converter for the lpg is prone to corrosion and failures internally so I would suggest that you have an accredited Auito gas specialist look at the gas system

Dec 03, 2014 | 1992 Toyota 4Runner

3 Answers

My car keeps stalling everytime I stop or slow down but starts up straight away after it has stalled?


The vacuum hoses have probably started cracking at the turns. If there has been any under the hood work done, sometimes things get pushed on or moved and the rubber hoses on the vacuum system will get old and crusty and crack. That cause the car to die when it slows down to an idle, like at a stop sign or stop light. then it starts and runs normal until the next stop sign.

Aug 06, 2014 | 1994 Holden VQ

1 Answer

Lpg converted engine wont run using lpg without gasoline in tank


It is normal. All LPG converted engines start with gasoline. Then when they reach 2000 rpm move on LPG system.
If you want to start directly with LPG must call a professional to modify your installation.

Jan 30, 2014 | Cars & Trucks

2 Answers

Vx v6 auto commodore wont start


could be a neutral switch key switch you have to check to see if you are getting voltage to small starter wire going to your starter motor .and if you are problem could be in starter

Nov 01, 2012 | 1998 Holden VT Commodore

1 Answer

V6 holden engine on lpg just stops while driving !


If the filter has already been changed, then the pressure regulator, which also acts as the vaporiser, must be suspect. It is equipped with a soleniod valve that shuts of the flow when the engine is not running,or if it thinks its not running.

Dec 22, 2008 | 2000 Land Rover Range Rover

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...