Question about 2000 Mitsubishi Eclipse

Open Question

Picture diagram for IAT sensor for 2000 eclipse v6

If no picture.......... can I get detailed location?

Posted by on

6 Suggested Answers

JShreader
  • 50 Answers

SOURCE: diagram for 2000 mitsubishi eclipse gt where is bank 1 sensor 2

Hello bbqu62, my name is JShreader. Thank you for choosing fixya.com.

There are several Oxygen Sensors on this particular model. There are also extra applications for California Emissions Vehicles. I uploaded some diagrams showing you ALL the Oxygen Sensors on this Vehicle in .pdf format. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

Posted on Apr 01, 2009

  • 112 Answers

SOURCE: where is the thermostat located on a 2000

on the top of the block where the top radiator hose runs to its held down by two bolts

Posted on Dec 06, 2009

  • 18 Answers

SOURCE: wire colors for my IAT sensor

red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Posted on Dec 21, 2009

GARYca
  • 672 Answers

SOURCE: Change a crankshaft position sensor on a 2000 eclipse

Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Posted on Mar 11, 2010

  • 1 Answer

SOURCE: i need a diagram of the engine where it shows the

I need to locate the crank position sensor on a 2000 eclipse

Posted on Dec 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where isa the crank shaft position sensor located on a 2000 V6 Eclipse?


0996b43f8020334f.jpgAuston, I couldn't load both at the same time go to auto zone sign is (it free) and look it up

Sep 10, 2014 | 2000 Mitsubishi Eclipse

1 Answer

2000 Mitsubishi eclipse gt


see the diagram attached. God bless you
3163d4ca-779e-46fc-8616-1eb120b57e7d.jpg

Jul 22, 2013 | Mitsubishi Cars & Trucks

2 Answers

Picture diagram for 2000 eclipse spark plug to distributer


According with engine sizes, check this for 2000 Mitsubishi Eclipse GT 3.0 liter SOHC V-6

zjlimited_399.gif



or 2000 Mitsubishi Eclipse GS 2.4 liter SOHC L4

zjlimited_400.gif

Hope helps.

Apr 29, 2011 | 2000 Mitsubishi Eclipse

1 Answer

Change a crankshaft position sensor on a 2000 eclipse


Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Mar 11, 2010 | 2000 Mitsubishi Eclipse

2 Answers

Where is iat sensor located on 2000 mazda mpv van . i have a p0113 code and cant find sensor


the IAT sensor is part of the Mass Airflow sensor. here is a picture of that sensor.

5787058.jpg

Dec 16, 2009 | 2000 Mazda MPV

1 Answer

Locating the iat sensor on a chevy tahoe 2008


Yes. That is exactly it. The Air Intake Temp Sensor is built into the Mass Air Flow Sensor on the Air Filter Box. Below is a picture...
29f8daa.jpg
6d7178d.jpg
I personally have not connected one of these Chips to a Tahoe...What I can provide you with, is the Connector Diagram so you know exactly what Wires you need to Splice in to. See below...
ce630fe.jpg
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesisitate to ask...Thanks again, JShreader.

Mar 31, 2009 | 2008 Chevrolet Tahoe

1 Answer

Need location of IAT sensor on 05 F150 5.4L


the IAT is a small round sensor with 2 wire going to it, the sensor is located in the air filter housing lid or in the flexible air intake hose to the engine from the air cleaner box.

here is a picture
1ad160e.jpg

Mar 30, 2009 | 2005 Ford F-150

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...