Question about 1998 Dodge Neon

1 Answer

2 out of 3 brake lights not working

The 3rd brake light works but not the other two (in the tail lights). I Checked the bulbs. The ones I pulled out, the glass was darkened as if they were blown but the wires in the bulb were not broken. The metal holding the wire was darkened/burned. I put in new bulbs but still have no brake lights. The fuse for the brake lights controls other features that are working just fine. Please help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

Check the connection, where you put the bulds in, it might be missing the metel connection. that happen to me before.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard and rear tail lights not working changed rear taillight bulbs and fuses was wandering if a blown bulb in the dashboard effects my no taillight problem


Dash, tail, and park lights are out - CarGurus

www.cargurus.com > Questions > Ford > F-150

CarGurusMar 19, 2013 - On the way to work I get pulled over, no tail-lights. ... Your ground is good because your other lights are working. I would .... hey my #6 fuse keeps blowing..no tail lights no dash lights.. head lights brake lights work fine.. also ...

No Dash lights, tail lights or Marker lights But Headlights, brake ...

forum.ih8mud.com > Forums > Toyota Tech Forums > 80-Series Tech
Dec 6, 2014 - I pulled over checked the fuses and again the Tail light fuse was out Put a new one in nothing. Now my taillights don't work but Brake lights, ...

Dash lights and running lights not working after installing ...

? 1:25
https://www.youtube.com/watch?v=SK36wPXo2EQ
Feb 11, 2014 - Uploaded by 4Runner Nation
I came to discover that the dash lights and running lights nolonger work. ... my brake lights and headlight i ...

I have no dash lights or tail lights - JustAnswer

www.justanswer.com > Buick

Jan 14, 2016 | Cars & Trucks

1 Answer

Have a 1997 Buick Skylark Has tail lights but no Brake,turn or hazard lights don't hear the flashers.


Hi,
If you check the brake switch first, pull connecter off and see if you have 12 volts on one side of the plug. if you have power use a small cotter pin and jump the connector the brake light should come on with the 3rd brake light also. If that doesn't work more than likely its your turn signal switch that is the culprit.

Dec 10, 2015 | 1997 Buick Skylark

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

I recently replaced the front rotors, brake pads and master cylinder in my 2003 Durango. I've since discovered that the brake lights are not working, including the 3rd brake light in the tailgate. I...


Hello, Well there is not much more it could be unless you have a shorted wire or a burned fuse. I would normally think that the turn signal canceler was bad but the 3rd brake light will still work if that is bad so I would check all fuses and for bare or shorted wires.

Jan 18, 2011 | 2003 Dodge Durango

1 Answer

Brake lights don't work, one in back window works but ones on tail lights don't checked bulbs and fuses and they are okay


I would check the wiring to the 2 side lights, and make sure they are grounded or none has been cut or corroded. You have good power going to the rear if the 3rd brake lite is working fine so I would trace the wire from the 3rd brake light to where it splits and goes to the 2 rear brake lights...

Nov 05, 2009 | 2001 Chevrolet Malibu

1 Answer

Tail lamps, turn signals work, running lights work-no brake light


check the socket for 12v if there is 12 volts then your terminals inside the socket are not making contact with the bulb terminal replace the socket

Jun 06, 2009 | 1983 Ford F 250

1 Answer

Brake lights do not work (3rd brakelight does) changed bulbs checked fuse


Problem could be the Brake Light Control Module. That's about the only other thing other than a bad wire somewhere if the bulbs and fuses are good. 91 Accord has 2. One on each side in the smaller of the 2 rear tail light lenses. In order to change the module you have to remove the smaller of the rear tail lights. Drivers side is 5 pin. Passenger side is 6 pin.

Jul 20, 2008 | 1991 Honda Accord

2 Answers

Brake lights dont work


i have a 1999 malabu and my brake lights went out i checked all fuses and changed all the bulbs and i also have no tail lights what could it be.

Jun 06, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1998 Dodge Neon Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...