Question about 1994 Chevrolet C1500

1 Answer

1994 Chevy c1500 engine removal - 1994 Chevrolet C1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

First thing, drain your cooling system. Pull the radiator and the hoses. Take your trans. lines loose. There are little horse shoe type clips where they go into your radiator. You need to take the radiator out. Unhook your battery. Unhook all wiring on the top of the engine like alternator, throttle body, all your sensors. Drop your exhaust manifold pipes down. Take your torque convertor bolts out. Take all your bell housing bolts loose, be sure you support the trans. first. Hook a chain to your engine. Unhook your 2 engine mount bolts. You may want to take the fan assembly off of it. Separate the engine from the trans.. Don't pull too far up, but pull the engine up above the mounts, then pull forward toward the front of the truck. It's not too bad a job. Good luck! Phil

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 chevy c1500 5.7 oil burning white smoke


If it smokes all the time when the engine is running then the piston rings are worn out. If it only smokes for a short time when accelerating, then the valve stem seals need replacing.

Apr 12, 2012 | 1994 Chevrolet C1500

1 Answer

I have a 1994 Chevy C1500 w/ 4.3 liter and my plugs are fouling out about every 500 miles or less and everything else maintanence wise I've replaced resently. Can someone give an idea on what need


Does the truck run right? Does it smell real gassy, fuel mileage go south? If it is fouling plugs that fast it either has to be burning a lot of fuel or oil. Is there a check engine light on? Engine wore out, burning a lot of oil. Fuel injector stuck, using a lot of gas. Air filter dirty, making it burn way rich. I would think this truck would really smell bad if it is fouling out the plugs that fast.

Jan 21, 2012 | 1995 Chevrolet C1500

1 Answer

I need to know how to find our what size engine my 1994 Chevy 4 x 4 truck - I can't see where it might be.


It is often stamped on the engine itself. If not there, check the drivers side door frame.

Jun 10, 2011 | 1994 Chevrolet C1500

1 Answer

I have a 1994 chevy cheyenne and am trying to replace the evaporator and cant find any help


you will need to remove the dash:

http://www.ehow.com/how_5588616_remove-chevy-dashboard.html

May 29, 2011 | 1994 Chevrolet C1500

1 Answer

1993 Chevy C1500, motor mount replacement


No. Pull your bolts so you can remove the engine and then change the mounts while the engine is hanging.

May 25, 2010 | 1993 Chevrolet C1500

1 Answer

Trying to replace headlamps in 1994 Chevy 1500 (5.7L V8 4x4). No clue how to get in there. Any ideas?


I don't know your chevy specifically but there are only two ways. Either in the engine compartment or a couple of screws on the outside hold the lens. Remove and you can change bulbs. You can always call your Chevy dealer and ask service advisor. They should be willing to help you otherwise you may buy a Ford. Good luck!

Mar 10, 2010 | 1994 Chevrolet C1500

1 Answer

Knock sensor location


if its a cmfi or csefi injection system theres 2 knock sensors 1 on each side of engine block,1 under the left bank of block,the other under right bank of block,tbi inj. theres 1 in front of starter.

May 27, 2009 | 1994 Chevrolet C1500

1 Answer

Want to disable coil


unplug the power or the wires

Robert

Jan 22, 2009 | 1994 Chevrolet C1500

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...