Question about 2003 Jeep Grand Cherokee

2 Answers

Cost toreplace power steering pump

What is typical cost to replace power steering pump ?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Im not to good at "SHOP PRISES" but Flat Rate Says 1.3 hours @ $65.00 To $80.00 Per hour +
Part markup Auto Zoo<LoL Zone wants $94.97 + tx for pump Shop Markup Cheapest would be 100% Roughly $290.00 Give NO take $50.00-$80.00 so there you Go sir/Mam Hope this Helps rejakwilson

Posted on Jan 16, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 64,034 Answers

About $150 for a rebuilt pump and 1.5 hours labor, so $300 would be in the ball park.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Noise when turning steering wheel in Kia Sedona


Check for leaks, probably need to replace that p/s pump.
you typically here "noise" when the fluid is low.

Dec 18, 2011 | 2002 Kia Sedona

1 Answer

The belt in my 01 Dodge Dakota squeals badly. Started when I had my power steering pump replaced. I tried changing the belt and the tensioner, but still squeals. Is it possible the pulley on the power...


excess mechanical drag from the pump can cause the belt to slip and squeal, but before focusing on the pump I'd check the condition, tension and alignment of the belt. I might even try cleaning all the pulleys with an aerosol brake cleaner and install a new belt, particularly if the current one has more than 50,000 miles on it. It might be that the squeal is coming from or caused by a different belt-driven accessory.
A more typical noise from a power-steering pump is a high-pitched whine, not a squeal. Usually, if the steering wheel is stationary, meaning that the steering rack is not "asking" for assistance from the high-pressure fluid from the pump, there's little or no noise

Jan 27, 2011 | 2001 Dodge Dakota

1 Answer

Need toreplace power steering fluid


easiest way to do this is to get a turkey baster and remove as much as you can out of the reservoir - if you do this, drive it a little, and do it again, replacing it each time with fresh fluid, you will replace most of the fluid.

Dec 30, 2010 | 2000 Chevrolet Venture

1 Answer

Metal pipe that goes into power steering pump is leaking. Can this pipe be tightened or resaeled or does it need replaced?


Needs to be replaced, i believe you are talking about you High Pressure Hose. Its pretty easy to replace and typically only cost about 10-30 dollars.

Jun 17, 2010 | Cars & Trucks

2 Answers

I have a 1997 toyota camry that was reported to have a power steering hose leak at 125,000 K and when I took it to another mechanic at 127,000 K he told me that I need a new power steering pump and power...


POWER STEERING PUMP OR HOSE HAS NO SET TIME OR MILEAGE TO FAIL WHEN THEY WEAR OUT THEY WILL FAIL ANY TIME.I WOULD HAVE POWER STEERING HOSE REPLACE FIRST.IF YOUR STEERING WAS NORMALWORKING GOOD BEFORE HOSE RUPTURE NO NOISES OR HARD STEERING.REPLACE POWER STEERING HOSE.BECAUSE POWER STEERING PUMP AND RACK PINION UNIT GOING TO COST RIGHT MUCH.ALSO BY IT BEING A IMPORT.

Feb 15, 2010 | 1997 Toyota Camry

1 Answer

What would the approximate cost to repair a 2001 ford taurus power steering. The car is hard to steer.


Cost at a shop to fix it $300 and up. Its really not that hard if you want to do it yourself. The power steering pump is located a the top of the motor its black and has 4 9 or 10 mm bolts holding it.
1. Remove belt
2. unbolt steering pump
3. unclamp hoses from pump keep them raised so fulid don't run out.
4. Replace pump

Jun 23, 2009 | 2001 Ford Taurus

2 Answers

Power steering pump making noise


It may quiet down for a while but the damage is done so the pump will eventually need to be replaced.

Jun 23, 2009 | 2006 Ford Taurus

2 Answers

How do I repair a leaking power steering hose?


ok thees instructions that i have is for replacing the power steering pump but it has a great pic witch shows the power steering hoses i hope it helps


NOTE The following procedure requires the use of the GM Puller toolNo. J-25034-B or equivalent, and the GM Pulley Installer tool No.J-25033-B or equivalent.
  1. Disconnect the negative battery cable for safety.
  2. Remove the air cleaner assembly for access.
  3. Release tension and remove the drive belt.
  4. Remove the power steering pump pulley using a suitable puller tool.
  5. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
  6. Position a fluid catch pan under the power steering pump.
  7. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
    WARNING Be sure to cap all openings in the pump hydraulic system toprevent excessive fluid spillage and the possibility of systemcontamination.
  8. Remove the power steering pump from the vehicle.

    0900c15280227d22.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Pump pulley removal and installation


    0900c15280227d23.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Exploded view of the power steering pump mounting


    0900c15280227d24.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Typical power steering pump hose routing

To install:
  1. Position the pump to the vehicle, then uncap and connect the pump hoses.
  2. Install the steering pump to the retaining bracket, then secureusing the retaining bolts. Tighten the nut to 30 ft. lbs. (41 Nm).
  3. Install the pump pulley using the GM Pulley Installer tool No.J-25033-B or equivalent. Press the drive pulley onto the power steeringpump.
  4. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
  5. Install the drive belt.
  6. Install the air cleaner assembly.
  7. Connect the negative battery cable.
  8. Refill the power steering reservoir and bleed the power steering system.
  9. Road test the vehicle, then check and top-off the power steering fluid.

Apr 23, 2009 | 2001 GMC Safari

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...