Question about 2003 Chevrolet Tahoe

2 Answers

Location of oil pressure sensor on a 2003 chevy tahoe

Posted by on

  • 3 more comments 
  • FHTMBROWN Mar 03, 2009

    I HAVE A 2003 TAHOE.... WHILE DRIVIG DOWN THE ROAD MY OIL PRESSURE DROPS TO ZERO (AFTER DRIVING FOR 30-45 MINITUES) SHOULD GOOD OIL PRESSURE WHEN IT IS COOL OR ON SHORT TRIPS. COULD THIS MEAN MY OIL PRESSURE SENSOR IS GOING OUT?

  • Anonymous Mar 13, 2009

    oil presure shows 0 changed sensor but still shows 0 what else can it be

  • Anonymous Mar 15, 2014

    how do you replace oil gauge sensor for 2008 chevy Tahoe hybrid?

  • Anonymous Mar 17, 2014

    where is IP to body harness connector located on chevy 2003 tahoe

  • Anonymous Mar 17, 2014

    kick panel located on chevy tahoe 2003

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

It is in the valley of engine behind intake.at back of engine you can get it out with a thin walled oil sender socket.

Posted on Jan 15, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Where is the oil sensor found on a 2003 chevy tahoe?

Posted on Dec 14, 2010

5 Suggested Answers

  • 126 Answers

SOURCE: Where is the oil sending unit located on a 2003 Chevy Tahoe 5.3 engine

its in the block behind intake manifold .

Posted on May 05, 2009

bschilz
  • 2049 Answers

SOURCE: Where is oil sending unit on 2003 Chevy Avalanche

It's at the very back of the block, top-center, under the intake manifold.

Posted on Jan 10, 2010

ftw1952
  • 10319 Answers

SOURCE: Oil pressure sensor is moving up and down while driving and need to check the fuse but can't find it.

No fuse for the switch on the engine although the cluster has a fuse for the instrument gauges

Posted on May 27, 2009

leetamara
  • 702 Answers

SOURCE: oil pressure sensor location

The sensor should be mounted at the rear of the engine next to the distributor at block.

Posted on Jun 10, 2008

  • 714 Answers

SOURCE: i have a 2003 chevy tahoe. the oil pressure guage

oil sending unit !

Posted on May 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chevy Tahoe .A light keeps coming on that says oil pressure is low. Stop the car. I took it to a local shop that checked the pressure and they said it was fine, but the instrument clust


The guage could be bad and losing connection triggering the message. My dads Tahoe reads low oil pressure but the sensor connection or stepper motor that moves the guage could and have had a history of being faulty.

Oct 01, 2014 | 2007 Chevrolet Tahoe

1 Answer

I need to locate the oil pressure switch on a 2003 chevy tahoe with a 4.8L V8


in the very rear, on top of the block. near where a distributor would be IF it had one.

Sep 07, 2011 | 2002 Chevrolet Tahoe

1 Answer

How to locate the oil pressure switch on a 03 tahoe with a 5.3 V8


The oil pressure sensor is located behind the intake manifold, at the very top and rear of the engine. It's in pretty much the same place as the old small block chevys have always had them (if you're familiar with them) It's right above where the transmission attaches to the engine. There is the camshaft sensor, right next to it, and the oil pressure sensor is the one to the driver's side. It' kind of a bear to get at , and even to see.

Mar 05, 2011 | 2003 Chevrolet Tahoe

1 Answer

My oil presure is pegged to the max on my 2003 tahoe...


Oil pressure sensor is located in the valley of engine behind intake.at back of engine you can get it out with a thin walled oil sender socket. This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Feb 27, 2010 | 2003 Chevrolet Tahoe

1 Answer

Where are the oil drain plug and oil filter located on my 2003 tahoe so that I may change my own oil? any special instructions?


Here is a step by step video on changing the oil and filter on your Chevy Tahoe. It starts with a lot of safety information, but will quickly get into the process.

http://revver.com/video/219938/chevy-tahoe-oil-change-auto-repair-video/

Jan 21, 2010 | 2003 Chevrolet Tahoe

1 Answer

2003 Tahoe, 5.3 liter vortec flex fuel. Engine replaced at 60k miles due to low end knock (typical late model GM). Scanner shows mutiple misfires on all 8 cylinders and erratic timing. Rough idle....


this is a comon problem on chevy 00-06 models a computer ground ,it seems ok at sight but inside it's just holding a few wires ,get under the car on the driver side passenger there you should find a two ground wire goin to the block a big, and a small ,the small one gets coroded try to fix it and let me know how it goes ok.

Nov 09, 2009 | 2003 Chevrolet Tahoe

2 Answers

WHERE ARE THE KNOCK SENSORS LOCATED AT ON AN 03 CHEVY TAHOE 5.3 2WD ?


Knock sensor can be found on top of the engine block, there are two you ´d have to remove the intake manifold to get to them,

Aug 05, 2009 | 2003 Chevrolet Tahoe

1 Answer

Oil pressure sensor is moving up and down while driving and need to check the fuse but can't find it.


No fuse for the switch on the engine although the cluster has a fuse for the instrument gauges

May 27, 2009 | 2003 Chevrolet Tahoe

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

3,784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...