Question about 1991 Chevrolet Caprice

1 Answer

Squileeng with the belt

I just replaced the powersteering pump and the belt when I put the new belt on one of the pullies is locked up now it makes a loud squileing noise and the belt smokes..

Posted by on

  • Anonymous Feb 24, 2009

    The power stearing belt squilees.The pullies are not locked up.How do you put more tention on the belt.

  • vfarrar Feb 24, 2009

    I have a squileeing power stearing belt on a 1993 Olds Achieva.How do you replace the belt?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 142 Answers

I need to know why you changed the power steering pump and the belt. It sounds like you had a problem and replaced the wrong component. You chould change whatever component is locked up behind the pulley and replace the belt. Let me know if this helps.

Posted on Feb 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What could cause my ford taurus 03 to cause such a loud squeeling noise?


it maybe the synchroniser which is under the throttle body (and houses the cam sensor)and makes the same noise. use a rubber hose to pimpoint the location of the noise

Sep 17, 2014 | 2003 Ford Taurus

1 Answer

Noise from belts or pullies


take the belt of and run the car without it for a few seconds if the noise has gone turn each pully by hand some times you can tell by turning then which one is goosed wigle them as well see if the bearings are ok usually it will be either the alternator bearings or the tensioner pully if it has one hope this helps ivan

Oct 23, 2012 | 2002 Mitsubishi Montero Sport

1 Answer

I installed a new powersteering pump on a 88 gmc k1500, now it eats serpentine belts cant get the pullies lined up right how do i fix?


I would install a reman pump,never try & remove a pully
The pump wasn't the problem

Your problem is most likely that the crank damper has
worn & moved. The rubber in it is the issue & it is hard
to see any misalignment

Jun 13, 2012 | Cars & Trucks

3 Answers

When I turn my van on it squeals very loudly and it gets worse when you press the gas. What could it be?


You could have a bad or worn serpintine belt. When you replace it make sure all the pulleys are rotating freelyi.e. air compressor, alternator, tensioner idler & power steering pullies to make sure all of their bearings are running freely. Good luck!

Jun 16, 2010 | 1996 Dodge Caravan

1 Answer

How to fit a alternator belt on a 1.8 diesal escort van 51plate


This should be the same as a car, jack the front of the car up put stands under, remove front wheels, remove bottom cover (about 7 screws), Remove powersteering pump pully 3 bolts, remove and refit new belt and P/S pully, you might get away with not having to adjust alt but if you have to youll need a 13mm spanner to undo the locking bolt then pull the alt tight (its really tight u might need a bar), once all done replace in reverse order.

Dec 16, 2009 | 2001 Ford Escort ZX2

1 Answer

1995 buick riviera, how do you put the power steering belt around the supercharger?


there is an a ideler pully that is at the very bottom on the engine u have to move that and put the belt on there i think if u put it on the super charger first then the powersterring pump

Nov 28, 2009 | 1997 Buick Riviera

1 Answer

Power steering pump replacement on 2002 chev


u will need 2 special tool to remove and reinstall the powersteering pully
it must be removed to acess the bolts to replace the pump and a new pump dose not come with pully

Nov 26, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
1991 Chevrolet Caprice Logo

Related Topics:

1,373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...