Question about 2007 Mazda B4000

1 Answer

2000 MAZDA B4000 Power Door locks not working properly

The power locks try to go up and down but can't do it.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem.... i fixed it by buying new actuators..... They work like new now

Posted on Feb 05, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: 2000 MAZDA B4000 ELECTRIC DOOR LOCKS NOT WORKING

i had the same problem .... i changed the actuators and they work like new now.

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 96 Mazda B4000 4wd pickup I need door lock cylinder one of mine is broke cant find any know where I could possibly find them. Thanks


I would get 2 the same keyed alike from a salvage yard

From there a lock smith maybe able to reprogram if nec

Jan 21, 2013 | 1996 Mazda Pickup

1 Answer

Maxda B4000 RPM skips 2000 to 5000


If you can actually hear the engine race up to 5000 RPM you may have a serious problem. But more then likely you cant actually hear the engine rev up. If this is the case I would suspect a bad Tachometer ground wire.

Aug 23, 2012 | 1997 Mazda Pickup

2 Answers

My back tire locks up on my 4x4 pic up on my Mazda b4000 4x4 1996


U MUST REMVOVE THE WHEEL TO CHECK THE BRAKES FOR OIL CONTAMINATION FROM A POSS LEAKING AXLE SEAL.

Nov 11, 2009 | 2007 Mazda B4000

1 Answer

2000 MAZDA B4000 ELECTRIC DOOR LOCKS NOT WORKING


i had the same problem .... i changed the actuators and they work like new now.

Jan 15, 2009 | 2007 Mazda B4000

1 Answer

B4000 steering stopped in mid turn.


your belt could be the culprit i had the same problem with my old ranger where the belt sliped under certain conditions and causes loss of power steering pump pressure.
the next time it happens pull the whell as hard as you can and se if it acts the same as when the vechile is turned off

Dec 18, 2008 | 2007 Mazda B4000

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

1 Answer

Interior light on Mazda b4000 won't go off when door is closed


on each door you will find a push type switch which closes as you close the door... open a door... push that switch... the light should go out.... keep doing that till you get to the door where it doesn't go out. I can't also be the interior light relay but test this first.

Robert

Nov 09, 2008 | 2007 Mazda B4000

Not finding what you are looking for?
2007 Mazda B4000 Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...