Question about 1999 Lexus LX470
I was pulling out of my garage and the door didn't open all the way...as i was backing up i hit the door and the window washer nozzle on the rear snapped and ripped off. I can buy one from someone but i don't know how to replace it. How do i install the new one/What do i have to unscrew in order to put the new nozzle in? thanks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 lexus lx470 ahc system
Caution on what to put in the LX470 automatic height adjustment system. Dealer said unless correct fluid is put in the system the seals may fail. Specifically warned against break fluid. Cost to repair is over $3,000. I bought a can of the fluid at the Lexus dealer for about $26. The can was approx. 1/2 gallon.
Posted on Jan 24, 2009
My information shows that your vehicle has High beam lamps and Low beam lamps .. they are different . which one did you buy?
1) If you bought 1 that is looks like this
It is the High beam lamp
2) If you bought 1 that looks like this
It is the Low beam lamp
Posted on Mar 29, 2009
There are a few thing's, one thing is to not accidentally touch the positive terminal with the negative battery cable or touch the negative terminal with the positive battery cable when your removing or installing the battery, if one of the cable's do touch the other post it may blow some fuse's, on some vehicles with radio anti theft systems when you remove the battery the radio will lock out, if you don't have the code you'll have to take it to a service dealer to have them reset it, other than that it's pretty much straight forward. good luck.
Posted on Apr 02, 2009
Lexus lx470 1999 Starter
Look at the "rear" of the engine where it joins the transmission. Follow the positive cable from the battery to it. Cog with the 'teeth' you see engages the flywheel to start the motor.
It looks similar to this.
Posted on Jun 01, 2009
Simply remove the plastic cover over the headlights and radiator. This is easy to remove by removing the plastic clips. On the headlamp assembly, there are three bolts that need to removed, two under the plastic cover and one at the top of the fender. Once this is done, gently pull it out, it will tend to hold onto the fender as it is grooved to do this...then reverse the steps to reinstall the headlight assembly
Posted on Sep 05, 2009
Tips for a great answer:
Apr 01, 2014 | 1999 Lexus LX470
Sep 23, 2010 | 2005 Lexus Lx 470
Mar 19, 2010 | 2004 Audi allroad
Dec 06, 2009 | 2001 Lexus LX 470
Sep 05, 2009 | 1999 Lexus LX470
Aug 25, 2009 | 1999 Lexus LX470
Jul 13, 2009 | 2002 Lexus LX 470
Jun 01, 2009 | 1999 Lexus LX470
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: