Question about 2001 Chrysler 300M

1 Answer

Ying to change the battery.. Cant remove air filterhousing

2001 300M

Posted by on

  • 1 more comment 
  • dayandkanoe Feb 25, 2009

    everything on the car is working but the car won't start and i can't get to the battery because i can't get

    the air filter off

  • ravenjkr Mar 28, 2009

    How do you replace the battery in the 2001 chrysler 300

  • Rich Palmer May 11, 2010

    I need mooe information as to what you are trying to accomplish.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To remove the battery in my 2001 300m you have to take off the front passenger side wheel/tire and remove the access panel and the battery will come out.

Posted on May 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DEAD CAR


It is possible that the accessory circuit is run through the ING fuse and the compressor has blow that fuse. Check all fuse associated with the ignition circuit including the fusible link if there is one. I had the same problem so I cut the plug off the wires and fitted a red and black al alligator clip to the separated wires and attached directly to the battery terminals . Place an inline fuse after the red clip to protect the compressor

Aug 31, 2014 | Cars & Trucks

1 Answer

Changing air filter 1996 chrysler town and country


loosen the clamp for the air snorkel at the throttle body. Loosen the clamp right under the reserve air chamber thats in between the radiator and the battery. Remove the breather hose from the air chamber. remove the two bolts holding the air chamber to the upper radiator support. remove the air chamber. there will be two retainers that need to be released on the transmission side of the air box and the the air box cover can be removed and the air filter changed

Dec 15, 2012 | 1996 Chrysler Town & Country

1 Answer

How do you change front blower motor in 05 dodge caravan


  1. Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal injury.
  2. Remove the glove box from the instrument panel.
  3. Remove the A/C-heater blower motor cover.
  4. Disconnect the blower motor wiring connector.
  5. Remove the blower motor wiring grommet and feed the wiring through the blower motor housing.
  6. Remove the blower motor mounting screws.
    Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle

Dec 03, 2011 | 2005 Dodge Grand Caravan

2 Answers

Do I need to go to a garage to change air filter for 1998 GS300 , or can I do it? Cant seem to find it in the manuel...


just look under the bonnet and you should see it and be able to do it yourself ,i cannot remember every car i repair in the course of a week let alone a few months ago ,just lift bonnet and have a look you may need to remove some plastic covers first though

Mar 01, 2011 | 1998 Lexus ES 300

1 Answer

I cant find the battery in my grand prix se 1994 pontiac


1. Loosen the four screws that hold down the top of the air filter box. 2. Loosen the clamp that attaches the air filter box to the intake hose. 3. Disconnect the air sensor connector from the top of the air filter box. Note: Secure the connector wire, it tends to drop down and more than once I have had to remove the air filter box to retrieve it. 4. Remove the top part of the air filter box. You may need to twist it to get it to release from the rubber air inlet Hose.
5. Remove the two bolts holding the bottom of the air filter box. 6. Remove the bottom part of the air filter box.
7. Disconnect the negative then the positive battery cables.
8. Remove the three bolts that hold the brace that goes over the Windshield washer tank. 9. Remove the brace.
10. Remove the Battery hold down clamp at the base of the battery.
11. Remove the two nuts that hold the fuse box to the fender well. 12. Remove the two fasteners from the front of the widshield washer tank. 13. Rotate the windshield washer tank away from the battery. You may need to move the tank and lift the fuse box to get the tank clear of the battery. 14 Remove the battery.
To Install reverse the steps.
Time: 5 to 10 Minutes

Jul 16, 2010 | 1994 Pontiac Grand Prix

1 Answer

Removing VW polo 2005 battery?


Removing a battery from a Beetle is a bit complex and tricky. I just changed the battery in a 2003 2.0 Beetle. However, the process is very similar in a TDI Beetle. You will need more than your standard generic tool set in order to complete this task. Your tool list needs to consist of a pair of pliers (prefer locking type), a # 20 TORX head screwdriver (You will also need this if you ever plan on changing the Beetle's internal dash pollen filter for the A/C. ), a 10 mm and 13 mm sockets, a long extension and a wobble or universal to allow flexibility in tight spaces, an allen socket for removing the power steering reservoir, and a small adjustable wrench or a 10mm to remove the battery cables. If you are changing the battery you might as well buy a new Air filter since you will need to remove the air box in order to replace the battery. If you do change the air filter you will need a phillips head screwdriver.

1. Pop the hood.
2. Remove the two 10 mm bolts that hold down the air filter box.
3. Undo the clamp that holds the large tubing to the air box using your pliers. Move the tubing away from the box.
4. Unclip hose attached to the back of the air box near the large hose (under it).
5. remove the small breather hose from the air box.
6. Pull air box up and out.
7. Remove snap on cover from top of battery.
8. Remove small snap on wiring cover from back of the battery covering.
9. Unbolt power steering reservoir (next to battery case).

10. Disconnect the battery cables. Positive side first.
11. Remove the 13 mm bolt at the base of the battery along with the hold down clamp.
12. Pull the top wiring away from the battery case and then slide the battery towards the engine.
13. Remove the plastic battery case.
14. Remove the battery

Oct 07, 2009 | 1997 Volkswagen Jetta

1 Answer

Cant find air ride suspension compressor


it is under the battery tray. remove the battery and remove the battery tray.you will see it then

Jun 26, 2009 | 1991 Lincoln Continental

1 Answer

Dodge ram 99 4wd cv bolt cant remove


A lot of heat (glowing if possible), and heavy air impact. I've never been able to break one without air impact, and sometimes have had to use a lot of heat as well.

Jun 03, 2009 | 1999 Dodge Ram

2 Answers

Changing battery


You have to remove a tire on the front, I cant remember which one but thats how its done

Dec 02, 2008 | 2000 Chrysler LHS

1 Answer

Im looking for the location on my van of the radiator fan relay i bought it at autozone and they cant tell me where it is to replace it . ity mounts to the block i assume but i cant find it


The relay is mounted against the drivers side frame rail below the battery/ air cleaner. It is held on with two 5/16" socket size screws. It is best to remove the relay, then push the red lock tab in to release the wire connector. I did not see it until I looked from below, very near the radiator. I pulled it from the top side, remove the air cleaner 10 mm bolts, undue the hose clamps at the throttle body, pull the hose and air cleaner top out, then one more 10mm bolt to remove the lower air cleaner section. Now it is clear to the relay. Plus you get to change your air filter now too.

Jul 24, 2008 | 1996 Dodge Caravan

Not finding what you are looking for?
2001 Chrysler 300M Logo

Related Topics:

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...