- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The only pump that will work in a GTP model is the pump for that model. And there are more than one tag number for the GTP.
Flow rates can be anything between 20 and 60 GPM.
You have to match the tag code for your car.
depending on the motor,, and in your case the vin number,, go to this link, ( just click on it) and click on your vehicle according to vin number , Look for a M,, 1,, or a K in the vin number to select the correct one,, if you need more help I'll need a lil more info,, just reply to this feed and I'll see it http://autorepair.about.com/library/firing_orders/bl-pontiac-firing-97.htm
If you have a GTP these engines use a hi output fuel pump. they use a fuel pump resistor located under the battery tray (look up from under the car) This resistor lowers the voltage to the fuel fump when not in boost mode. because of its locatoin it is prone to corrosion. if you bypass the wires and the engine starts and stays running replace the resistor
Make sure your cooling fans are coming on when the temp heats up. Are you talking about a leak inside the car or outside? Inside is usaully a drain tube for the A/C stopped up. Outside, look for a water pump or intake gasket.