Question about 2008 Hummer H3

1 Answer

GREASE FITTINGS WHERE ARE THE GREASE FITTINGS, HOW OFTEN SHOULD I GREASE THEM, ON A H3

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hummer Master
  • 60,792 Answers

There are either grease fittings or plugs where they go, the fittings will be in the ball joints and the tie rod ends. should grease about every 6,000 miles or so, if u go through water allot more often

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the pressed in grease fitting on a 1930 Ford


Grab it with a good set of vice grips and work it out, I have had grease fittings that won't take grease and some of them the parts had to be removed and the lube hole cleaned out. you can also buy a grease injector that is a hollow barrel with a plunger that fits down in it and you pull out the plunger fill the barrel with grease install the plunger, place the injector on the grease fitting and hit the plunger with a good size hammer

Jan 12, 2016 | Ford Cars & Trucks

2 Answers

What are the locations of the grease for the front end of 97 mercury sable..


You most likely don't have any grease fittings. Most front ends are "lifetime lubricated", and they save money by not putting zirc fittings on them.

May 09, 2015 | Mercury Sable Cars & Trucks

1 Answer

Where are the grease fittings on a toyota2007 tocoma


Not all vehicles have grease fittings. Some are sealed but if it absolutely needs grease then put a needle nozzle on your grease gun and put pin hole into grease boot on ball joint, tie rod,etc. and give it some grease.

Sep 13, 2014 | Cars & Trucks

1 Answer

How do I find the grease fittings


There aren't any, most likely. Most vehicles since 2000 don't have grease fittings.

Sep 01, 2014 | 2007 Chevrolet Silverado 1500

1 Answer

Front end grease fittings


I replaced all of my joints, ball, tie rods, etc with grease fittings. If you can't see or feel them, there are none. You can try a grease needle that are sold at auto parts stores for cheap. You have to pierce the joints and inject them slowly. Eventually you'll have to replace them with joints that have fittings.

Mar 30, 2014 | 1991 Isuzu Trooper

1 Answer

Where are the grease fittings for ball joints on 1992 Nissan Sentra E


The vast majority of cars today do not have grease fittings for most components. They are sealed for the life of the part from the factory.
Only some replacement parts come with grease fittings.

Jan 21, 2013 | Cars & Trucks

1 Answer

Where are the grease fittings on the front end on my 2004 Pontiac Montana


many vehicles no longer have grease fittings. This does not remove the need for lube, however. When items fail be sure to install aftermarket parts (like Moog) and they will have grease fittings.

Sep 03, 2010 | 2004 Pontiac Montana

2 Answers

ARE THERE GREASE FITTING ON THE FRONT END OF THE 2005 AND 2007 F 150 TRUCIS. I SNED MY FLEET TO BE SERVICED AND THEY COME BACK STATING NO LUBE


Grease fittings don,t come on new trucks anymore
I Have 2005 F 350 and a 1999 F450 and there is no grease fittings

Aug 30, 2010 | 2005 Ford F-150

1 Answer

Where are the grease fittings ?


Manufacturers generally removed grease fitting from suspension part back in the 80's. Some put a removable plug in the ball joints, tie rod ends, etc, which could be removed and grease fittings installed in their place, but most have sealed and permanently greased. In other words you can not lubricate any fittings. If parts go bad, the replacement suspension parts generally have grease fittings.

Aug 10, 2010 | 2000 Mercury Grand Marquis

2 Answers

Where the grease fiitings located on a 1995


probably are none since joints are perm lube type

Jul 06, 2009 | 1995 Lincoln Town Car

Not finding what you are looking for?
2008 Hummer H3 Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...