Question about Peugeot 405

1 Answer

Peugot 307, 2003

The gear knob has become all floppy and is stuck in one gear

Posted by on

  • eastendboy21 Feb 26, 2009

    i pulled in to a car park and as i stoped i heard a pop, then the gear changer went all floppy and now car is stuck in 2nd gear, had a look under the car and have noticed that there is a rod or poll hanging down form the gear box area at a glance looks like it fixes to the engine but im not 100% shore as its dark out side, looks like there 2 hole in rod were screws might go all help greatfully recived ; )



    kind regards sean

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

The gear linkage will have popped off at the gearbox. Look down the back of the gearbox, have a fish around and you should find a connecting rod loose and flopping around. Look for the ball joint it connects to and replace. A tip is just before you reconnect the rod back onto the ball joint, wrap the ball joint with a small piece of plastic bag, this will take up the play, and allow you to get home. I would recommend buying a new rod.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automatic gear shifter n button stuck


Help!! My automatic shift knob is stuck. - AnandTech Forums

forums.anandtech.com > Social > The Garage

AnandTech
Nov 1, 2007 - 8 posts - ‎5 authors
The button that one would push in in order to move the shift knob is stuck and will not respond. Any ideas would be great, thanks.

How To Repair / Replace A Broken Or Stuck Shifter Shift ...

? 5:31
https://www.youtube.com/watch?v=gRPG8D7Pa-U

Jan 28, 2016 | Cars & Trucks

1 Answer

Is there a light in the gearstick area of peugot 407 if so where are the fuses and bulb located


there IS a light source--either a separate bulb or a light pipe to direct illumination to the gear shift indicator. No separate fuse. Where is it? The French are VERY creative in such maters and you will need the Owners manual or Service manual to find it. I DO NOT recommend you start taking things apart to find it.

Sep 13, 2014 | 2007 Peugeot 407 SW

1 Answer

Jeep wrangler 2005 automatic floor gear shifter is loose won't engage stuck in park


try pushing the knob down onto the shifter a little bit then try and shift. Sometimes if that knob is raised even a little bit it will be locked in park. Can't be 100% sure without seein it but worth a shot. Hope that helps you.

Oct 02, 2012 | Jeep Wrangler Cars & Trucks

1 Answer

Peugot 206 overheating problem


you could faulty themostat or engine coolant temperature sensor faulty do a code scan see what code come up.

Nov 15, 2011 | Cars & Trucks

1 Answer

I have a Peugot 406 Diesel estate (R), unable to engage any gears and gear lever loose and floppy. Can't drive the car at all. Any suggestions?


Gear Linkage from the gear lever to the gearbox may have come off unless the lever goes directly into the top of the box

Sep 27, 2010 | Peugeot 405 Cars & Trucks

1 Answer

I have a chrysler 300. the gear is stuck.


YOUR GEAR LINKAGE IS BROKEN,,OPEN ENGINE,,GET SOMEONE TO MOVE THE GEAR KNOB WHILE YOU LOOK INTO ENGINE YOU WILL SEE MOVEMENT IN THE GEAR LINKAGE ,,THEN YOU WILL HAVE TO FIX THAT ,,,JOB DONE

Jun 18, 2010 | 2005 Chrysler 300

1 Answer

The gear shift gets stuck and won't shift into other gears.Will put it reverse and then try to put in drive and it gets stuck in reverse.


Either the shift knob or the actuator rod under the shift knob has worn out.
Remove the shift knob and pull the actuator rod (plastic) out of the shift lever and inspect it for wear or damage. If the rod is not worn or damaged, replace the shift knob and you will be good to go.
Good luck.

Nov 11, 2009 | 1997 Pontiac Grand Prix

1 Answer

No gears


please explain a bit better ,is it stuck in one gear ,is it the gearstick all floppy??

Nov 02, 2009 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

74544 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...