Question about 2002 Toyota Camry

1 Answer

Toyota camry altise 2002 headlights blurred when I use the brake

The headlights of my car will become blurred when I use the brake and the stereo will stop as well, but when I release the brake the music is ok again. Sometimes in the stop light the engine will just stop. The battery of my car is new. Please help me.

Posted by on

  • 1 more comment 
  • billaln May 11, 2010

    could you be more specific, just what is the problem?



  • honeeey82
    honeeey82 Feb 29, 2012

    I have the same problem!! the headlights, dim, the radio goes off for a few seconds, all the needles in the gauges drop to 0. It started when I just hit the brake, but now it just happens as I'm driving along. I've had the engine stop only once when sitting at lights. once i started the car again, it didn't happen again, for that day.
    We've had a part in the alternator checked, but still no luck.

  • Drew Sep 18, 2012

    I have the same problems but on steroids. Lights dim when driving or stationary, stereo goes off for a second or two, turn on high beam and engine stuters and drop out of crouse control & electric window contorls stop working until the car is turned off and on again.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

I wou the alternator output checked, and the tension of the belt checked also. It seems that you do not have enough voltage in the electrical system. A bad alternator will give you exactly what you are experiencing.

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Remove & Install a Rear Bumper 2008 toyota camry altise


FSm covers that
alldata.com ,log in and read like we do.?
remove skins, the unscrew bolts (obvious)

Oct 21, 2014 | 2008 Toyota Camry

1 Answer

Does the ecu have to be removed if lost keys to a 2007 toyota camry altise, and the doors are still unlocked


it is exactly to remove ECU if you lost your master key and ECU have one IC need to be reprogrammed for new key chip

Dec 19, 2013 | 2007 Toyota Camry

1 Answer

Toyota 2002 Camry Altise


May have bad computer

Feb 08, 2012 | Cars & Trucks

3 Answers

Daytime Running Lights Inoperative 2002 Toyota Camry


[Information] For a 2002 Toyota Camry, the Daytime Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to the center of the vehicle front) at a reduced power.

[The troubleshooting process:] Review the Owner's Manual and ensure the test configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."


2. Set the Test Conditions according to Step 1 above.

3. Check the headlight bulbs to ensure they are not burned out. If one burns out, there is a fair chance that the other would have burned out at the same time. Replace as necessary. In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]


My problem was that the test configuration did not have the engine running and parking brake off - Step 1. Problem solved with much thought, repetitive tests on the vehicle and going back to the basics -- what does the Owner's Manual say and where are the applicable fuses and relays located?

Dec 30, 2011 | 2002 Toyota Camry

1 Answer

Does the model have a cam belt if so when should it be replaced toyota camry altise 2006 vvt-i 16 valve


Your Camry does NOT have a timing belt, Only the V6 model. 5 years or 90k is the typical service interval for those. call your local dealer and verify with your VIN #...also, ask about any recalls, service alerts and other info pertaining to your vehicle. Thanks.

Mar 05, 2011 | 2006 Toyota Camry

1 Answer

How to install headlights on 2002 toyota camry


I assume you mean just the bulbs:
  1. 1 Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off.
  2. 2 Open the hood using the primary and auxiliary hood release latches.
  3. 3 Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced.
  4. 4 Turn the headlight bulb socket counterclockwise to remove it from the assembly.
  5. 5 Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.
  6. 6 Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.
  7. 7 Test the new headlight to make sure it works before closing the hood.
Thank you,
Lee

Aug 25, 2010 | 2002 Toyota Camry

1 Answer

Red light on dash for air conditioner flashers and turn of air conditioner light keeps flashing toyota camry altise 2002


never seen a red light on a dash for a air conditioner before,are you sure its not for the air bag?

Oct 18, 2009 | 2002 Toyota Camry

1 Answer

Changed Brake light bulb still won't come on


Are you saying that neither of the brake lights work or is it just one of them?

Jun 29, 2009 | 2002 Toyota Camry

1 Answer

Hand brake, Camry Altise


Hello, I researched this problem for you and it is a common problem with the Altise. It feels like you have to pull the E-Brake really far up I am assuming. Factories and Dealerships do not normally adjust these to each and individual car but this is not a complicated thing to do. Adjusting your parking break from your car can be some what complicated due to the amount of work you have to do to get to it inside your car. You may have to remove your console to get to the necessary screws to take your cover around your transmission selector out but if you mark and bad all your parts and screws and their locations this should not be difficult at all. You can also try to adjust the parking brake from under neath the car and you will probaly have to remove a cotter pin and a washer and then screw the lond U shaped connector at the front of your parking brake cable towards the rear of the vehicle to make it more tight. This may fix the long travel of the parking brake cable. Just take note that this is a common problem with your vehicle but with a little time you can make this a manageble fix that you will be happy with and I hope you fix this and are happy with the work you done as well. I would refer to a Haynes or Chilton Auto Repair Manual for the best step by step information as well.

May 22, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...