Question about 2000 Jeep Grand Cherokee

3 Answers

2000 Jeep Grand Cherokee stalls

I have a 2000 jeep grand cherokee 4.0L that stalls at any point and starts back up. Sometimes I have to wait 3 min and then Starts. I can drive for 30 min without stalling or some times two hrs. I had it checked out by a mechanic and there are no codes and good pressure in the fuel system.

Posted by on

  • 3 more comments 
  • Anonymous Mar 11, 2014

    my start button on my suzuki intruder vl 125 is unresponsive. when i push the button with the clutch in and the bike in neutral nothing happens

  • Anonymous Mar 11, 2014

    my horn wont work and my blinkers only work sometime on my 250 cc strret bike

  • Anonymous Mar 11, 2014

    fuel light flashes even with petrol in ,engine turns over but wont fire

  • Anonymous Mar 12, 2014

    how to set the time on a Youyoupifa army style watch

  • Anonymous Mar 12, 2014

    EF Ford Falcon automatic.- Under normal driving the car runs ok however when travelling up hill in drive it changes down a gear as you accelerate to maintain speed (normal). Then when you get to the top of the hill you back off acceloration then the engine starts to run very eratic for about a minute then runs as normal. If you accelerate during this time,the problem is made worse. If you stop the car the same problem continues until until it runs normaly.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 19,396 Answers

You need to go to a qualified garage and have a scan reading done on the car ECU, that is the computer module, this will return error codes that can tell you the cause of the problem.

Posted on Jan 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 818 Answers

Crankshft Position Sensor replace it.
Sergio

Posted on Jan 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

A couple things to check... what colour is the engine oil and also the colour of the exhaust ?

Robert

Posted on Jan 15, 2009

  • Roberta Smith
    Roberta Smith Jan 15, 2009

    you did say it's not displaying any codes correct ?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 jeep grand cherokee has sluggish idle sometimes doesnt stay started


You could possibly have a bad EGR valve which would affect the vacuum which affects the idle. Check for a vacuum leak first then check the egr valve

Aug 14, 2014 | 2000 Jeep Grand Cherokee

1 Answer

2006 jeep grand cherokee stalls then hard to start again


Get rid this vehicle to some pond and buy a new one.

Aug 11, 2012 | 2000 Jeep Grand Cherokee

1 Answer

2000 Grand Jeep Cherokee Limited, V 8. Just died at a red light. We got push it to the side of the road and 2-3 mins it started. This has happen 3-4 times. What could be the problem?


Right after it stalls (and you are in a safe place) Turn the key on and listen for the fuel pump to come on (in the tank). If you don't hear it, likely it is going bad. When they do that, the pump gets hot and binds...after it cools off it starts working again.
If you can hear the pump, chances are that the crank position sensor is failing. The symptoms are nearly identical.

Mar 05, 2011 | 2000 Jeep Grand Cherokee

1 Answer

While driving my 2000 jeep grand cherokee laredo sometimes it will start stalling and all my gauges go to zero then go back up now my odometer says done what can the problem be?


i would see if you have a friend with a code reader that will plug into the obd2 port to read the computer. it sounds like the computer was trying to run a self diagnosis program which shouldt happen unprompted.

Dec 22, 2010 | 2000 Jeep Grand Cherokee

2 Answers

2000 grand cherokee stalls


try replacing the idle air control motor or IAC for short. i actually had one at work today with your same complaint. and sure enough the valve was a carboned up and wouldnt work properly. and its nearly impossible to clean to the point where it will work properly. cost for the part at a dealer is about $115.

Jan 15, 2009 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...