Question about 2002 Chevrolet Blazer

Open Question

2002 Chev Blazer, location of purge valve??

Can anyone tell me the location of the purge valve??

Posted by on

  • Charlie May 11, 2010

    Do you mean the purge solenoid valve? If so, it's located on top of the engine, directly behind the ignition coil. It's cylindrical in shape and has a 3 wire electrical connector on top of it.
    Charlie


×

6 Suggested Answers

  • 18 Answers

SOURCE: location of pcv valve on chev 1500 pu

its either the left or right valve panel.

Posted on Sep 03, 2008


CRTN
  • 716 Answers

SOURCE: Locating Chev Blazer 2002 Engine ID Code

The i.d Code Should Be On The Front Of The Engine Behind The Fan On A Metal Plate.

Posted on Jan 08, 2009

  • 3 Answers

SOURCE: Can someone pls tell me

If you are talking about the EVAP valve , it is located on the top of your fuel tank.

Posted on Jan 15, 2009

savdragon
  • 37 Answers

SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?

You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Posted on Mar 19, 2009

emissionwiz
  • 60667 Answers

SOURCE: where is the purge valve

rear of truck next to the carbon canister in a tray by the fuel tank

Posted on Oct 14, 2010

Testimonial: "thank you so much !!"

wyet_helps
  • 339 Answers

SOURCE: I can't locate the canister

{: ) Top right center of the engine, near the fuel injector connector.



wyet_helps.gif

Posted on Jul 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know where to find the canister purge valve


For the location of canister purge valve,check the following help links mentioned below:--
Click the link :---

Location for EVAP Purge Valve Solenoid?

http://schematicsdiagram.blogspot.in/2012/06/2002-nissandatsun-pathfinder-location.html


------------------

How to disconnect the hose form the Evap Canister?

http://schematicsdiagram.blogspot.com/2011/12/how-to-disconnect-hose-form-evap.html

-------------

2004 Chrysler PT Cruiser: Location of EVAP Purge Solenoid Valve?

http://schematicsdiagram.blogspot.in/2012/06/2004chrysler-pt-cruiser-location-of.html

-----------
These will help.
Thanks.

Jan 08, 2013 | Cars & Trucks

1 Answer

Where is the evap purge canister valve located on a 2002 kia sedona?


The canister purge valve is located behind the intake manifold in the engine compartment on the firewall side .It should be a small round solenoid with a wire connector attached.It will have a feed hose from the evap cannister to the purge valve and then to the intake manifold.The evap canister is located on under the vehicle on the right side of the gas tank and is held in place by a bracket.If you follow these hoses it will also get you to the canister purge valve.I hope this helped.

Feb 03, 2011 | 2002 Kia Sedona

1 Answer

2002 chevy blazer codes 443 449 i replaced the maf sensor the vaf sensor on air horn the emmision valve on the engine the vent valve to even tried the gas cap clear codes drove the truck guess what codes...


p0443 is evaporative emission control system, purge control curcuit malfunction, p0449 is emission control system, vent control curcuit malfunction. p0449 is often a filler cap problem on fuel tank. try tightening cap

May 20, 2010 | 2002 Chevrolet Blazer

2 Answers

2002 GMC Z-71 Check Engine Light codes????


Off hand, it's by your oil fill tube on top off motor.

Mar 30, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Were is the evap located on 2001 Chevy s-10 blazer with v6


The EVAP service port is located in the EVAP purge pipe between the EVAP purge solenoid and the EVAP canister. The service port is identified by a green colored cap.

47e8f38.jpg

Fig. Showing location of (1) Evaporative Emissions (EVAP) Canister Purge Solenoid and (2) Exhaust Gas Recirculation (EGR) Valve


4d7b3e9.jpg

Fig. EVAP Purge valve solenoid (3) mounting bolt (2) and insulator (1) on 2000-2005 4.8L, 5.3L, 6.0L Engines

Hope this help (remember rated the post).

Mar 26, 2010 | 2001 Chevrolet Blazer

1 Answer

Need how to and location to replace knock sensor


Im looking for the same part location on a 2002 chevy blazer. It might be under the distributer cap.

May 30, 2009 | 2001 Chevrolet Blazer

1 Answer

Can someone pls tell me the location of the purge valve in 2002 Chevrolet Blazer


If you are talking about the EVAP valve , it is located on the top of your fuel tank.

Jan 15, 2009 | 2002 Chevrolet Blazer

1 Answer

Locating Chev Blazer 2002 Engine ID Code


The i.d Code Should Be On The Front Of The Engine Behind The Fan On A Metal Plate.

Jan 08, 2009 | 1995 Chevrolet Blazer

1 Answer

Location of pcv valve on chev 1500 pu


its either the left or right valve panel.

Aug 16, 2008 | 2002 Chevrolet Silverado 1500

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

Related Topics:

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...