- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.2carpros.com/topics/body/hood-release?page=5Asked by vasti about 3 years ago - 4 Answers; 1994 Isuzu Amigo Engine Problem ...On my 2000 blazer the hood release cable broke and I can't open my hood.
It actually is going to depend upon where the break in the cable is. I'm basing this on the model year but you might check to see if any of the cable is still extended & broken where it connects to the lever that you use to open it. If you can see the broken strands/cable you can easily clamp onto that with vice-grips, or similar pliers & pull on the exposed cable to open it.
IF you cannot see the cable, you are limited as the whole intent of the cable system was to prevent anyone from opening the hood without the release cable. You can attempt to determine where it broke based upon the cable you pull out of it (the part still connected to the release handle), cut the cable past that point without cutting the inner, "pull" cable, then pull on the exposed cable once out. Get your replacement cable at the dealer or local salvage yard.
Check under the hood latch opening area to see if the small cable could be snagged & pulled but that's a slim chance.
Finally, Body shops are the best at getting to things like this since they usually have to dissasemble those parts for repairs, they would be well suited to remove other parts to gain access. good luck
if it is broken at the handle you should be able to grasp the cable with pliers to pull it otherwise you will have to go out front of truck and the best way i found requires long arms, but you would have to use a flashlight and slide under front bumper and look upward to find cable/latch assembly. You may be able to do it through the grill but if cant see it through the grill under neath.if you in front of truck pull latch to right and it will release.
can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to open it.IF its broken at the latch itself,you are going to have to reach the latch through the grille and try to pull the lever the cable connects to.That part is no fun at all..!!
if the cable is not broken then pull the release then take the side of your fist and pound on the hood starting towards the top drivers side and slowly move towards the latch try it a few times i have to do this every single time on my blazer
If the cable is not broke have someone pull on the latch inside while you repeatedly press down on the hood. It might take a few tries but it should finally pop. Once it does open spray the latch and linkage with a silicone spray to get it lubricated and do this frequently to prevent it from happening again. If the cable is broke inside at the handle you will have to remove the kick panel, strip the coating back on the cable and pull the cable with a pair of pliers it should release. If the cable is broken under the hood, you will need to remove the grill and use a screw driver to release the latch.