Question about 1988 Mazda B2200

2 Answers

Mazda b2000 clutch slips when warm

Just had clutch and flywheel replaced. in cold weather- no problem. when it warms up, above 50 f and i drive about 10 min., the clutch starts to slip if i apply a little power. no problem engaging or disengaging gears.

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 73 Answers

If you replaced clutch and pressure plate. Did you reverse bleed the clutch cylinder on the firewall? It has air in the system, that is why it is acting this away.

Posted on Jan 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

This is a Common Problem after Replacement of a Clutch. After a Few Miles it is not Unusual to Have to have it Adjusted Again. I would take it back to whoever Fixed it and have them Adjust the Clutch.

Posted on Jan 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ford mustang clutch

Might be the pressure plate .

Apr 01, 2014 | 1996 Ford Mustang

1 Answer

Ford mustang clutch

did you pack the thrust bearing with grease before fitting. its always best to pack with grease before fitting. as new bearing only come with a small amount for testing the bearing, pack grease into the bearing and spin it do this fa few times and wipe away the excess off before fitting.

Jul 03, 2017 | 1996 Ford Mustang

1 Answer

My VW Jetta isnt warming up in cold weather the guage runs at 90 c on a normal day but on a cold day it is at about 60 c and when im in the city driving slower its at 50 c

Check t-stat. I might be stuck open and allowing the coolant to cycle continuously. This prevents the engine from warming up.

Dec 07, 2013 | Cars & Trucks

1 Answer

1990 honda accord manual transmission slipping when car warms up. What causes this?

Not sure if you're talking about the clutch, or the transmission. In either case, they will have to be replaced.

Oct 26, 2011 | 1990 Honda Accord

1 Answer

2004 ram3500 transmission slippage when warm

Hi, transmission slipping normally does not occur when the transmission is warm, as warm temperatures favor proper working of the automatic transmission systems. Nonetheless, if problems such as, broken transmission bands, gears or torque conversion already exist, then the transmission might slip even in warm temperatures. Another situation may arise, if the fluid suffers from contraction in cold weather and gradually the weather warms up sufficiently, to expand the internal parts and fluids. Then due to cold weather, a small transmission problem might occur. However, the problem may be too small to affect the vehicle. However, warm weather cannot be directly linked to transmission slipping.

Jun 12, 2011 | 2004 Dodge Ram 3500 Truck

1 Answer

I have a 1999 Mazda 626 5 speed and my rpms seem to always be high weather I'm driving n town, 4th gear 30 mph 2100 rpm, or on the highway 5th gear 70 mph and rpms at 3100. This I'm sure is killing my gas...

check clutch for slipping condition,mayb due to worn clutch disc or a oil contaminated disc or a weak pressure plate not locking disc to flywheel therefore giving u a slipping condition and higher than normal rpms

Apr 09, 2011 | 1999 Mazda 626

1 Answer

Judder on initial take off when cold.

check replace the engine/transmission rubber mounts

Jul 04, 2017 | 2003 Volkswagen Passat

1 Answer

The 2000 mountianeer starts and runs fine but shuts off


Jan 24, 2009 | 2000 Mercury Mountaineer

Not finding what you are looking for?
Cars & Trucks Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8830 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides