Changing windsheild wipers

Driver side: 24"
Passenger: 20"
Rear: 16", although I use 18-20 for better coverage

Passenger side: 20" ; Driver's side: 24" GK



At 2001 Windstar all old models, driver front 24", passenger front 20", rear window 16"
Driver side 24 inches, passenger side 20.


Hope helps (remember to rate and commen this).

Pop the plastic cap off the wiper arm and tighten the nut that holds the arm on .

the linkage between the wiper motor and the wiper arms needs to be replaced. the stud on the one side is stripped and that is why it doesn't work as it should. this happens usually when the wipers are left on in the winter with the blades freezing to the windsheild. turn on the car with frozen blades tends to strip out the teeth holding the wiper arms onto the linkage

Hi,
Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage. Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later. Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of work to break it free, but with the right amount of wiggling, it will disengage. Then you can replace the new windsheild wiper arms to it.

Thank you !!

call autozone and ask about blades for your car,they will tell you what side is what size

The 1996 Ford Bronco takes a 18" replacement wipers on both drivers side and passenger side. Don't just go by lengths though - when buying windshield wiper blades be sure to always use the application guide book at the store or now-a-days you can Google 'lookup wiper size'.

You want to look this up because correct wiper fit is more than correct length, it's also proper attachement. Not all attachments fit all arms. Using the application guide or looking up wiper size online will avoid headaches of buying the right lengths with the wrong attachements.

The replacement wiper blades will come with step-by-step, illustrated instructions and once you have the instructions and the wiper blades/arms in your hands in front of you, it will all make better sense and will an easy maintenance task. Very simple and takes 5-15 minutes usually not requiring any tools.

If in your budget, upgrade to the newer-style frameless "beam blades" which perform better than conventional framed wipers. I use Trico NeoForm Beam Blades which are fantastic. Hope this helps!

These wiper controls are notorious for failing. Most likely the wiper switch is bad, but have the wiper motor tested just to be on the safe side. Hope this helps, good luck!

The 23 should work on the drivers side but you will need a 19" on the passenger side.
Hope this helps and let me know.
Regards,

The rear wiper fuse number is 24 in the passenger compartment fuse box.