Question about 1997 Hyundai Sonata

Open Question

1997 hyundai sonata 2.0 dohc is out of time

My hyundai for some reason had a rocker arm fall off, the car still ran but very rough when stopped and in gear, i put it back on without removing the cam or anything else so i would not have to worry about the timing and went to start the car and it acts like the timing is off and wont start, i am not sure how to check the timing on a dohc engine, i did see paint marks on the sprockets but not sure what they are supposed to line up with and what else needs to be done to see if the timing is correct. any help on this would be greatly appreciated and thank you, john

Posted by on

6 Suggested Answers

blueextc3221
  • 15935 Answers

SOURCE: I want to know how much oil I need for an oil change

4.2 Quarts for the THETA engine (4cyl)
3.7 Quarts for the Lambda Engine (6 cyl)

Posted on Jan 17, 2009

  • 740 Answers

SOURCE: timimg marks on a 2004 hyundai sonata 2.4 dohc

Here is a diagram of you timing marks good luck and thanks for using FIX YA . please leave me a feedback.http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Mar 29, 2009

SOURCE: hi i have a 2004 hyundai sonata 4 cyl dohc and i

hi,
i have attached the image of the spark plugs and their location of them, in your car. Hope your problem is solved.Please rate my solution as helpful.Have a nice day.6b361a1.jpg6df4835.jpg

Posted on Feb 28, 2010

Testimonial: "Thanks You Helped Me A TON!"

  • 1757 Answers

SOURCE: trouble replacing timing belt ... setting timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1996/make/hyundai/model/sonata/1996_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

blueextc3221
  • 15935 Answers

SOURCE: proper coil firing order on 2001 hyundai sonata

Sorry i missed the chat opportunity.
Please be sure you have this correct information.

3ebd92a.gif

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Aug 08, 2010

elshaddai159
  • 1016 Answers

SOURCE: coil firing order 2001 hyundai sonata 2.5 liter v6

Here it is.

d49c233.jpg

Posted on Aug 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing tensioner pulley for 2011 Hyundai Sonata


This is a link to a youtube video. Not same year as yours. Thinking is removal method would be the same. Timing chain replacement Hyundai Sonata 2006 2009 GLS 2 4L DOHC Install...

Jul 04, 2016 | Hyundai Cars & Trucks

1 Answer

Need spark plug firing order for 1997 hyundai sonata


1997 Hyundai Sonata GL 2.0 liter DOHC L4

zjlimited_805.gif


1997 Hyundai Sonata GL 3.0 liter SOHC V-6

zjlimited_806.gif


I hope this helps, abd just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment. Have a nice weekend and thanks for using FixYa.

Jose.

Oct 18, 2011 | 1997 Hyundai Sonata

2 Answers

Good morning changing haed gasket on 1.5 hyundai accent how much torque for head bolts and rocker arm bolts


cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

May 12, 2011 | Hyundai Motor 1998 Accent

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

1 Answer

I just need a diagram of spark plug replacement in 1997 Hyundai sonata 2.0 liter engine automatic.


For the 1997 Hyundai Sonata 2.0L DOHC In-Line 4-Cylinder:

Firing Order:
1 - 3 - 4 - 2
Cylinders:
..........(back)..........
|...4....3....2....1...|
.........(front)
Coil Connections:
(back)
|..1..|
|..4..|
|..3..|
|..2..|
(front)

Let me know if this helped and THANKS for using FixYa.com!

Aug 04, 2010 | Hyundai Sonata Cars & Trucks

1 Answer

Picture of firing order for a 2000 hyundai sonata


2000 Hyundai Sonata 2.4 liter DOHC L4

07b4e41.gif


2000 Hyundai Sonata GLS 2.5 liter SOHC V-6

6dcd2d6.gif


Hope this help (remember comment and rated this).

Apr 06, 2010 | 2000 Hyundai Sonata

1 Answer

MSD for Hyundai Sonata GLS 1992 16V DOHC


Hi;I live in Iran and I have a Hyundai Sonata GLS 1993 4cyls 1997cc 16V DOHC(G4CP Engine type) and I want to install an ecu 39110-33150 for care

Feb 26, 2010 | 1992 Hyundai Sonata

1 Answer

1997 sonata, sunroof is stuck open two inches, motor is burnt out, can i close manually? I dont care if it works, I just want it closed, thanks.


from inside the car, look at the arms on the window, remove the screws, and you shound be able to push the arms down, be careful as to not bend the arms, reinsert scrwes.

Nov 26, 2008 | 1997 Hyundai Sonata

Not finding what you are looking for?
1997 Hyundai Sonata Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...